Turck
Turck NI20U-M30-VP4X 1582462 Inductive sensor PNP M30×1.5 20mm IP68 179g
M30×1.5 inductive sensor detects all metals at 20mm with IP68 protection and PNP output
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 20 mm sensing range detects all metals at equal distance
- M30 × 1.5 stainless-steel barrel rated IP68 for harsh environments
- Resists magnetic fields to prevent false triggers in industrial settings
- PNP complementary output with 1065 VDC supply suits DC 4-wire systems
- 179 g non-flush mount sensor with uprox+ factor-1 technology
Inductive sensor PNP M30×1.5 20mm IP68
This inductive sensor detects all metals at the same 20 mm rated switching distance thanks to its Factor 1 characteristic. It uses a PNP changeover output on a DC 4-wire 1065 VDC cable connection. The stainless steel 1.4301 housing meets IP68 protection and resists magnetic fields. It is built for non-flush mounting in harsh industrial environments.
Suited for non-flush metal detection needing
Engineers who need reliable sensing on mixed metals without recalibration will benefit from the uprox®+ design. The extended temperature range and high switching frequency support demanding automation cycles. Buyers who require flush mounting or a smaller threaded diameter should consider other models. Applications needing a connector instead of a cable connection are not served by this unit.
20 mm rated switching distance on all metals
The Factor 1 rating means the 20 mm sensing distance applies equally to steel, aluminium, copper and brass. This single figure decides whether the sensor reaches the target in your fixture. Verify the non-flush mounting requirement and M30 × 1.5 thread match your mechanical design before ordering.
Highlights
- 20 mm sensing range detects all metals at equal distance
- M30 × 1.5 stainless-steel barrel rated IP68 for harsh environments
- Resists magnetic fields to prevent false triggers in industrial settings
- PNP complementary output with 1065 VDC supply suits DC 4-wire systems
- 179 g non-flush mount sensor with uprox+ factor-1 technology
Specifications
| Brand | TURCK |
|---|---|
| Model | NI20U-M30-VP4X 1582462 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Does the sensor come with mounting hardware or do I need to buy nuts and washers separately?
The unit is supplied as a single sensor in a box; mounting nuts and washers for the M30 × 1.5 thread are not included and must be sourced separately.
Should I choose a flush or non-flush version for my application?
This model is the non-flush (unshielded) type with a 20 mm rated switching distance, so select it when you need maximum range and can keep metal clear of the sensing face.
What does the 20 mm switching distance mean when the sensor is installed in a machine?
It will reliably detect a standard steel target at up to 20 mm from the sensing face, and the Factor 1 design gives the same distance on aluminium, brass or stainless steel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
