Turck
Turck Ni20U-M30-ADZ30X2 inductive sensor M30 20mm IP68 182g 4282810
M30 threaded inductive sensor detects all metals at 20 mm with IP68 protection and magnetic-field resistance
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 20 mm sensing range detects metal targets at distance
- Factor 1 on all metals simplifies setup across materials
- IP68 protection withstands water and dust ingress
- Magnetic-field resistance ensures stable operation near interference
- Chrome-plated brass M30 housing resists corrosion in harsh environments
Industrial M30 inductive sensor
The Turck Ni20U-M30-ADZ30X2 is a non-flush threaded barrel sensor built for industrial detection tasks. Its chrome-plated brass housing meets IP68 protection and resists magnetic interference. The uprox®+ design gives a factor 1 response on all metals at a 20 mm switching distance. It suits automation engineers who need reliable presence sensing in harsh environments.
Thermals noise and power draw
The sensor operates on either AC 2-wire 20…250 VDC or DC 2-wire 10…300 VDC with a normally open contact. As a solid-state switching device it produces no audible noise and negligible heat during normal operation. Current consumption stays within the limits of the two-wire loop supply. Extended temperature range capability ensures stable performance across wide ambient conditions.
20 mm factor 1 switching distance
The rated switching distance of 20 mm with factor 1 for all metals is the specification that defines suitability. Applications requiring a longer sensing range or flush mounting will need a different sensor design. The M30 × 1.5 thread and cable connection fix the mechanical and electrical interface. Buyers who need a different thread size or connector type should select another model.
Highlights
- 20 mm sensing range detects metal targets at distance
- Factor 1 on all metals simplifies setup across materials
- IP68 protection withstands water and dust ingress
- Magnetic-field resistance ensures stable operation near interference
- Chrome-plated brass M30 housing resists corrosion in harsh environments
Specifications
| Brand | TURCK |
|---|---|
| Model | Ni20U-M30-ADZ30X2 4282810 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How do I install the M30 × 1.5 threaded barrel correctly, and what mounting mistake should I avoid?
Screw the chrome-plated brass barrel into a matching M30 × 1.5 hole and tighten to the specified torque; the common error is mounting it flush, but this model requires non-flush installation to achieve the rated 20 mm switching distance.
What maintenance or replacement will the sensor need over its service life?
The sensor has no moving parts or user-serviceable components; the 3-year parts and 1-year labor coverage applies to manufacturing defects, so replacement is only needed if the housing, cable, or switching element fails.
What limit appears first when the sensor runs continuously at high switching frequency?
The extended temperature range defines the thermal ceiling; sustained high-frequency operation will hit the upper ambient limit before the factor-1 metal detection or magnetic-field immunity degrades.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
