Turck
Turck NI15-S30-RZ3X 43557 Inductive Sensor M30×1.5 15mm 143g
M30×1.5 threaded inductive sensor detects metal at 15 mm with NC contact, PA12-GF30 housing and cable connection
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 15 mm switching distance for reliable detection
- M30 × 1.5 threaded barrel fits standard mounts
- PA12-GF30 housing resists impact and chemicals
- NC contact output simplifies fail-safe wiring
- 143 g lightweight design eases installation
Industrial Inductive Sensor M30
The Turck NI15-S30-RZ3X 43557 is a non-flush inductive proximity sensor with a 15 mm rated switching distance. It uses a threaded M30×1.5 plastic barrel made from PA12-GF30 and weighs 143 g. The unit provides a normally closed contact output and connects via an integrated cable. It suits automation tasks requiring non-metallic housing and extended sensing range.
Verify Voltage And Mounting Space
Confirm that your control circuit operates within the specified AC 20-250 VDC or DC 10-300 VDC ranges before installation. The sensor requires a non-flush mounting cutout to achieve the full 15 mm switching distance, so surrounding metal must not obstruct the sensing face. Ensure the M30×1.5 thread matches the intended fixture and that cable routing allows for the fixed cable connection.
Integrates Into Automated Systems
The plastic housing resists corrosion and reduces weight in conveyor or packaging lines where metal sensors add mass. Its normally closed output simplifies fail-safe wiring for safety circuits or end-of-travel detection. The wide operating voltage span lets the same model serve both AC and DC control panels, reducing spare-part variety. The fixed cable eliminates separate connector purchases but requires strain relief at the termination point.
Highlights
- 15 mm switching distance for reliable detection
- M30 × 1.5 threaded barrel fits standard mounts
- PA12-GF30 housing resists impact and chemicals
- NC contact output simplifies fail-safe wiring
- 143 g lightweight design eases installation
Specifications
| Brand | TURCK |
|---|---|
| Model | NI15-S30-RZ3X 43557 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Does the box include mounting hardware or do I need to buy nuts and washers separately for the M30×1.5 thread?
The sensor ships as a single unit in a box; mounting nuts and washers for the M30×1.5 thread are not included and must be sourced separately.
Which operating voltage suits my application, AC 20250 VDC or DC 10300 VDC?
The sensor is rated for both AC 20250 VDC and DC 10300 VDC; select the version that matches your supply voltage.
What does the 15 mm rated switching distance mean when the sensor is mounted non-flush in metal?
At 15 mm rated switching distance with non-flush mounting, the sensor detects metal targets reliably without needing a clear zone around the barrel face.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
