Turck
Turck NI10-P18SK-Y1X 40361 Inductive Sensor M18x1 10mm NAMUR
M18×1 inductive sensor detects metal at 10 mm with NAMUR output via terminal chamber
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 10 mm sensing range for reliable detection
- NAMUR output per DIN EN 60947-5-6 for safe signalling
- M18 × 1 threaded barrel for secure mounting
- PA12-GF30-V0 plastic housing resists harsh environments
- 68 g lightweight design eases installation
Industrial Inductive Sensor M18x1
The Turck NI10-P18SK-Y1X 40361 is a non-flush mount inductive sensor built for industrial position detection. Its threaded M18 x 1 barrel fits standard mounting points in automation and machinery. The NAMUR output to DIN EN 60947-5-6 suits intrinsically safe circuits in hazardous areas. It serves engineers specifying reliable metal detection at a 10 mm rated switching distance.
Sustained Load Behaviour
The sensor maintains a stable 10 mm switching distance during continuous operation on nominal 8.2 VDC supply. NAMUR current signalling provides consistent output without the voltage drops seen in standard DC switches under long cable runs. The terminal chamber allows secure wiring that resists vibration loosening over extended duty cycles. PA12-GF30 housing resists chemical exposure common in process environments.
Thermals Noise and Power Draw
Plastic PA12-GF30-V0 housing eliminates metallic heat sinking but avoids eddy-current losses at the sensing face. The 68 g mass limits thermal inertia so the unit tracks ambient temperature quickly. NAMUR two-wire operation draws minimal current, reducing self-heating inside the terminal chamber. No moving parts or active cooling means silent operation in noise-sensitive installations.
Highlights
- 10 mm sensing range for reliable detection
- NAMUR output per DIN EN 60947-5-6 for safe signalling
- M18 × 1 threaded barrel for secure mounting
- PA12-GF30-V0 plastic housing resists harsh environments
- 68 g lightweight design eases installation
Specifications
| Brand | TURCK |
|---|---|
| Model | NI10-P18SK-Y1X 40361 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How much power does the NI10-P18SK-Y1X draw when it is running continuously?
The sensor operates at a nominal 8.2 VDC as a NAMUR two-wire device, so its current draw is limited by the connected switching amplifier rather than the sensor itself.
What must I already have to install and operate this M18 inductive sensor?
You need an M18 × 1 threaded mounting hole, a NAMUR-compatible switching amplifier or safety barrier, and wiring to the terminal chamber inside the housing.
Will the NI10-P18SK-Y1X work alongside my existing NAMUR amplifiers and PLC input cards?
Yes, its output follows DIN EN 60947-5-6, so it is compatible with standard NAMUR amplifiers and PLC input modules designed for that standard.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
