Turck
Turck NI10-G18SK-AN6X 46423 inductive sensor NPN M18 10mm 1030VDC 82g
M18 threaded inductive sensor with 10 mm switching distance, NPN output and 1030 VDC rating
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 10 mm sensing range detects targets reliably
- NPN normally-open output suits standard PLC inputs
- M18 × 1 chrome-plated brass housing resists corrosion
- 10–30 VDC supply fits common industrial power
- 82 g lightweight body simplifies machine mounting
M18 inductive sensor for 10 mm switching
The Turck NI10-G18SK-AN6X is a threaded-barrel proximity sensor with a 10 mm rated switching distance. It mounts in an M18 × 1 hole and uses a chrome-plated brass housing. The NPN normally-open output suits PLC inputs and simple control circuits. Buyers who need a flush-mount variant or a PNP output cannot use this model.
DC 3-wire supply limited to 10–30 VDC
The sensor operates on a DC three-wire connection within a 10–30 VDC range. The terminal chamber accepts stripped conductors for direct wiring without a separate connector. Voltage spikes above 30 VDC will damage the output stage. Installations that run on AC mains or higher DC bus voltages must add a suitable power supply.
10 mm non-flush sensing range decides fit
The 10 mm rated switching distance applies only when the sensor face sits proud of the surrounding metal. Mounting it flush cuts the effective range roughly in half and may cause false triggers. Builders who need the full 10 mm through a metal bracket must keep the face clear. Applications requiring longer range or flush mounting need a different sensor.
Highlights
- 10 mm sensing range detects targets reliably
- NPN normally-open output suits standard PLC inputs
- M18 × 1 chrome-plated brass housing resists corrosion
- 10–30 VDC supply fits common industrial power
- 82 g lightweight body simplifies machine mounting
Specifications
| Brand | TURCK |
|---|---|
| Model | NI10-G18SK-AN6X 46423 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Should I pick the 10 mm switching distance version or a different range?
This model provides a 10 mm rated switching distance with non-flush mounting, so choose it when that sensing range fits your application.
What does the 10 mm switching distance mean once the sensor is installed?
The sensor will reliably detect a standard target up to 10 mm away from the M18 × 1 barrel face when mounted non-flush.
What does the 1030 VDC rating cap in practice?
The 1030 VDC operating voltage is the maximum DC supply the NPN output stage can handle; do not exceed it.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
