Turck
Turck NI10-G18-AN6X 46423 Inductive sensor NPN M18 10mm 82g
M18 inductive proximity sensor with 10 mm switching distance, NPN normally-open output and terminal-chamber connection
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 10 mm sensing range detects targets reliably
- M18 × 1 threaded barrel fits standard mounts
- Chrome-plated brass housing resists corrosion
- NPN normally-open output simplifies PLC wiring
- 82 g lightweight design eases installation
Industrial Inductive Sensor M18
The Turck NI10-G18-AN6X 46423 is a non-flush inductive proximity switch with a threaded M18 × 1 barrel. It delivers a rated switching distance of 10 mm and uses a DC 3-wire NPN normally open output. The chrome-plated brass housing weighs 82 g and terminates in a terminal chamber for wiring.
Automation Engineers and Maintenance Teams
This sensor suits applications requiring non-flush metal detection at 10 mm range with NPN signalling. It is not for buyers who need a flush-mount format, a PNP output type, or a different barrel thread size. The fixed 10 mm sensing distance also rules out uses demanding longer or adjustable range.
Panel and Machine Integration
The M18 × 1 thread allows direct mounting into standard tapped holes or brackets without special adapters. A terminal chamber provides screw connections so no separate connector cables are required. The 10–30 VDC supply range lets the unit share common industrial DC bus voltages used by PLCs and relays.
Highlights
- 10 mm sensing range detects targets reliably
- M18 × 1 threaded barrel fits standard mounts
- Chrome-plated brass housing resists corrosion
- NPN normally-open output simplifies PLC wiring
- 82 g lightweight design eases installation
Specifications
| Brand | TURCK |
|---|---|
| Model | NI10-G18-AN6X 46423 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What supply voltage must my system provide for the NI10-G18-AN6X sensor?
The sensor operates on a DC supply up to 1030 VDC, so your power source must deliver a compatible DC voltage within that range.
Will the M18 × 1 threaded barrel fit the existing mounting holes on my machine?
Yes, the housing uses an M18 × 1 thread, so it matches any M18 × 1 clearance or tapped hole designed for that size.
How can I verify the NPN output is switching correctly after installation?
With the target at the rated 10 mm switching distance, measure the output wire — it should pull low (NPN) when the target is present and release when the target moves away.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
