Turck
Turck FDNP-S0808H-WW 6603330 I/O Module DeviceNet 8 in 8 out 1.4A IP67
A DeviceNet I/O module with eight PNP inputs and eight 1.4 A outputs in an IP67-rated housing
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 8 digital PNP inputs for flexible sensor connections
- 8 digital outputs at 1.4 A each drive actuators directly
- IP67 rated housing withstands dust and water ingress
- Fibre-glass reinforced PA6 housing resists vibration and shock
- Encapsulated electronics with metal connectors ensure reliable operation
DeviceNet I/O module with eight inputs and outputs
The Turck FDNP-S0808H-WW is a compact DeviceNet I/O module that provides eight digital PNP inputs and eight digital outputs rated at 1.4 A each. It uses M12 connectors with two ports per connector and includes a separate actuator power supply. The module is designed for industrial automation systems that require distributed digital signal handling over DeviceNet.
Suited for IP67 environments needing short-circuit
This module suits installations where vibration, shock, and exposure to dust or water demand an IP67-rated housing with encapsulated electronics. Builders who need analogue signals, higher output current per channel, or a different fieldbus protocol should look at other products because this unit only handles digital I/O on DeviceNet.
Eight digital outputs at 1.4 A per channel
The defining specification is the eight digital outputs each capable of delivering 1.4 A, combined with eight PNP inputs on a single DeviceNet node. This channel count and current rating determine whether the module can drive the required actuators and sensors without additional expansion blocks.
Highlights
- 8 digital PNP inputs for flexible sensor connections
- 8 digital outputs at 1.4 A each drive actuators directly
- IP67 rated housing withstands dust and water ingress
- Fibre-glass reinforced PA6 housing resists vibration and shock
- Encapsulated electronics with metal connectors ensure reliable operation
Specifications
| Brand | TURCK |
|---|---|
| Model | FDNP-S0808H-WW 6603330 I/O |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What M12 connectors and cable clearance does the FDNP-S0808H-WW need for mounting?
The module uses M12 connection technology for signal and power, with two ports per connector. Its fibre-glass reinforced PA6 housing and metal connectors are rated IP67, so allow space for the M12 cables and gland seals when planning the mounting layout.
How is the separate actuator power supply wired during installation, and what step is often missed?
Connect the actuator supply to the dedicated M12 power port; the module electronics are encapsulated and the housing is vibration and shock resistant. A common oversight is leaving the separate actuator feed disconnected, which disables the 1.4 A outputs while the inputs still appear active on DeviceNet.
Which parts of the FDNP-S0808H-WW may need replacement after extended use in a -25 °C to 70 °C environment?
The M12 connectors and cable glands are the primary wear items; the encapsulated electronics and PA6 housing are built for the full temperature range. Inspect connector seals and locking nuts periodically, and replace any that show cracking or corrosion to maintain IP67 protection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
