Turck
Turck BL20-GW-PBDP-12MB 6827002 PROFIBUS-DP gateway 12 Mbps
PROFIBUS-DP gateway connects BL20 I/O modules at 12 Mbps with IP20 protection and Sub-D female connector
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- PROFIBUS-DP gateway links BL20 I/O to fieldbus at 12 Mbps
- Rotary coding switch sets the node address without software tools
- IP20 protection suits cabinet mounting in 0 °C to 55 °C environments
- Diagnostic LEDs show supply voltage, group and bus errors at a glance
- Supplied with two end brackets and an end plate for immediate DIN-rail assembly
PROFIBUS-DP gateway at 12 Mbps
The Turck BL20-GW-PBDP-12MB connects a BL20 I/O system to a PROFIBUS-DPV0 or DPV1 network. It is intended for electricians and automation engineers who need a fieldbus interface for distributed I/O in industrial cabinets. The unit ships new with two end brackets and an end plate for DIN-rail mounting.
Capacity and headroom at 12 Mbps
The gateway operates at the full PROFIBUS-DP speed of 12 Mbps, providing sufficient bandwidth for typical discrete and analogue I/O modules on a BL20 station. A rotary coding switch sets the node address locally without software tools. The ambient temperature range of 0 °C to 55 °C defines the thermal headroom for continuous operation inside a protected enclosure.
Practical limits of PROFIBUS-DP interface
The Sub-D 9-pin female connector follows the standard PROFIBUS pinout, so cable length and device count are governed by the PROFIBUS-DP specification at the chosen baud rate. Protection class IP20 restricts use to cabinets or housings that keep out dust and water. The module weighs 179 g and carries a three-year parts and one-year labour warranty from the manufacturer.
Highlights
- PROFIBUS-DP gateway links BL20 I/O to fieldbus at 12 Mbps
- Rotary coding switch sets the node address without software tools
- IP20 protection suits cabinet mounting in 0 °C to 55 °C environments
- Diagnostic LEDs show supply voltage, group and bus errors at a glance
- Supplied with two end brackets and an end plate for immediate DIN-rail assembly
Specifications
| Brand | TURCK |
|---|---|
| Model | BL20-GW-PBDP-12MB 6827002 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Will the 12 Mbps PROFIBUS-DP gateway connect to my existing BL20 I/O modules?
Yes, the gateway is the interface between the BL20 system and PROFIBUS-DPV0/DPV1, so it links directly to the BL20 modules you already use.
Which LEDs confirm the 12 Mbps gateway is operating correctly after installation?
The unit provides LEDs for supply voltage, group errors and bus errors; all three should be green or off with no red indication when the link is healthy.
Does the 6827002 gateway ship with the end brackets and end plate needed for DIN-rail mounting?
The box includes two BL20-WEW35/2-SW end brackets and one BL20-ABPL end plate, so no separate mounting parts are required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
