Turck
Turck BI2-M12-Y1X-H1141 40102 inductive sensor M12 8.2 VDC NAMUR
M12 flush-mount inductive sensor with NAMUR output at 8.2 VDC and ATEX approvals
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- NAMUR output enables reliable two-wire switching
- 2 VDC nominal voltage suits low-power circuits
- M12 × 1 male connector allows quick installation
- ATEX and SIL2 approvals support hazardous-area use
- 46 g chrome-plated brass housing resists corrosion
Application fit
The Turck BI2-M12-Y1X-H1141 is an inductive proximity sensor built for hazardous-area machinery monitoring. Its NAMUR output and ATEX approvals suit process engineers and maintenance teams who need intrinsic safety in zones with gas or dust explosion risk. Buyers who require a standard PNP or NPN switching signal for direct PLC input will need a different interface.
Sustained operation
The sensor delivers a nominal 8.2 VDC NAMUR current signal that remains stable during continuous duty cycles on conveyors, valve actuators or rotating equipment. Rated switching distance of 2 mm and flush mounting keep detection repeatable when vibration or temperature swings persist over long shifts. SIL2 and PLc ratings confirm the safety function holds under prolonged load without drift.
Build and connectivity
A chrome-plated brass M12 × 1 threaded barrel weighs 46 g and resists coolant, oil and wash-down chemicals common in plant environments. The M12 × 1 male connector enables quick-disconnect cable routing inside cable trays or conduit, reducing rewire time during sensor replacement. Flush mounting lets the face sit level with brackets or metal plates, protecting the active surface from impact in tight machine frames.
Highlights
- NAMUR output enables reliable two-wire switching
- 2 VDC nominal voltage suits low-power circuits
- M12 × 1 male connector allows quick installation
- ATEX and SIL2 approvals support hazardous-area use
- 46 g chrome-plated brass housing resists corrosion
Specifications
| Brand | TURCK |
|---|---|
| Model | BI2-M12-Y1X-H1141 40102 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Does the 8.2 VDC NAMUR sensor generate noticeable heat or electrical noise during continuous operation?
The NAMUR output operates at low current levels defined by DIN EN 60947-5-6, producing minimal heat and no significant electrical noise when powered correctly.
What external equipment is required to read the NAMUR signal from this M12 sensor?
A NAMUR-compatible isolator or switching amplifier with an M12 connector is required to convert the sensor's current signal into a usable logic level.
Will this 2 mm switching distance sensor mount flush alongside older M12 inductive sensors on the same bracket?
Yes, the M12 × 1 threaded barrel and flush-mount design match standard M12 sensor dimensions, allowing direct replacement on existing brackets.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
