Turck
Turck BI15U-EM30WD-AP6X Inductive Sensor M30×1.5 15mm 10-30VDC PNP
M30×1.5 inductive sensor detects all metals at 15 mm with factor 1, withstands -40 °C to +100 °C and IP69K wash-down, 10–30 VDC PNP NO output
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 15 mm sensing range detects all metals equally
- IP69K rating withstands high-pressure wash-down cleaning
- Stainless steel V4A housing resists acid and alkaline agents
- Operates from -40 °C to +100 °C in harsh environments
- PNP normally-open output on 10–30 VDC cable connection
M30×1.5 Inductive Sensor for Metal Detection
The Turck BI15U-EM30WD-AP6X is a flush-mount inductive sensor with a 15 mm rated switching distance. It operates on 10…30 VDC and provides a PNP normally-open output via a cable connection. The stainless-steel V4A housing suits harsh industrial environments.
IP69K Protection and Magnetic Field Immunity
The sensor meets IP69K and withstands temperatures from -40 °C to +100 °C. A special double-lip seal resists 10 bar pressure and common acid or alkaline cleaning agents. Factor 1 for all metals ensures consistent switching on steel, aluminium, brass and copper without correction factors.
15 mm Switching Distance with Uprox+ Technology
The 15 mm range covers typical presence and position tasks on M30 mounting points. Uprox+ design maintains the full distance on all metals while suppressing interference from strong magnetic fields. Builders needing longer range or non-flush mounting should select a different model.
Highlights
- 15 mm sensing range detects all metals equally
- IP69K rating withstands high-pressure wash-down cleaning
- Stainless steel V4A housing resists acid and alkaline agents
- Operates from -40 °C to +100 °C in harsh environments
- PNP normally-open output on 10–30 VDC cable connection
Specifications
| Brand | TURCK |
|---|---|
| Model | BI15U-EM30WD-AP6X |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Should I choose the 15 mm flush-mount version or a non-flush alternative for my M30×1.5 threaded hole?
This sensor is the flush-mount version with a 15 mm rated switching distance; a non-flush model would need a larger mounting clearance and typically offers a longer range.
What does the 15 mm rated switching distance mean when the sensor is installed in a real machine?
It will reliably detect a standard steel target at 15 mm when mounted flush in metal; the Factor 1 specification means the same distance applies to all metals without correction factors.
What does the 10–30 VDC PNP cable connection cap in practice?
The 3-wire PNP output switches the positive supply to the load, so the maximum load voltage equals your supply voltage up to 30 VDC and the cable length adds series resistance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
