Turck
Turck BI10-P30-Y1X 40400 Inductive Sensor M30×1.5 10mm 8.2V NAMUR
M30×1.5 inductive sensor with 10 mm switching distance, 8.2 V NAMUR output, PA12-GF30 housing and ATEX/SIL2 approvals
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 10 mm sensing range detects metal at distance
- M30 × 1.5 threaded barrel fits standard mounts
- NAMUR output at 8.2 VDC suits hazardous areas
- PA12-GF30 housing resists impact and chemicals
- ATEX and SIL2 approvals certify safety compliance
Industrial proximity sensing
The Turck BI10-P30-Y1X 40400 is an inductive sensor built for flush mounting in M30 × 1.5 threaded barrels. It targets maintenance engineers and panel builders who need reliable metal detection in hazardous-area installations. The NAMUR output complies with DIN EN 60947-5-6 for intrinsic-safety loops.
Sustained-load behaviour
A rated switching distance of 10 mm remains stable across the approved temperature range because the PA12-GF30 housing resists chemical attack and mechanical vibration. The 8.2 VDC two-wire circuit draws constant current whether the target is present or absent, so signal integrity holds during continuous duty cycles. ATEX and SIL2 approvals confirm the design survives prolonged exposure to explosive atmospheres.
Upgrade path
This unit replaces older non-approved sensors where new risk assessments demand ATEX II 1D through II 3D and SIL2 PLc certification. The jump is worth it when insurance audits require documented intrinsic safety or when cable routing must stay unchanged because the threaded barrel and cable connection match existing cut-outs. Buyers who need longer sensing ranges or wireless diagnostics will not find them here.
Highlights
- 10 mm sensing range detects metal at distance
- M30 × 1.5 threaded barrel fits standard mounts
- NAMUR output at 8.2 VDC suits hazardous areas
- PA12-GF30 housing resists impact and chemicals
- ATEX and SIL2 approvals certify safety compliance
Specifications
| Brand | TURCK |
|---|---|
| Model | BI10-P30-Y1X 40400 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How much heat or noise does the BI10-P30-Y1X generate during continuous operation?
As a passive inductive sensor without active electronics or moving parts, it produces no audible noise and negligible heat while running on its nominal 8.2 VDC supply.
What external equipment is required for the NAMUR output on this sensor to function?
The NAMUR output to DIN EN 60947-5-6 needs a compatible intrinsically safe switching amplifier or safety PLC input to convert the current signal into a usable logic level.
Can the M30 × 1.5 threaded barrel replace an older M30 sensor with a different switching distance?
Yes, the M30 × 1.5 thread matches legacy M30 mounts, but the rated switching distance is fixed at 10 mm so the detection point will differ from sensors with other ranges.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
