Turck
Turck BI10-M30-VN4X 1582352 Inductive Sensor NPN M30×1.5 10mm IP68
M30 inductive sensor detects all metals at 10 mm with IP68 sealing and NPN output
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 10 mm switching distance detects metal reliably
- IP68 protection withstands dust and water immersion
- Factor 1 sensing treats all metals equally
- Magnetic-field resistance ensures stable operation near interference
- M12 connector enables quick DC 10…65 V installation
M30 × 1.5 Inductive Sensor
The Turck BI10-M30-VN4X is a flush-mount inductive proximity switch with a 10 mm rated switching distance. It delivers a complementary NPN output on a DC 4-wire circuit that accepts 10 to 65 VDC. The chrome-plated brass barrel carries an IP68 rating and resists magnetic fields, making it suitable for harsh industrial environments.
Factor 1 Metal Detection
The uprox®+ design gives a factor 1 response on all metals, so no correction factors are needed when sensing steel, aluminium or copper. This replaces sensors that require separate calibration for different target materials and is worth the change when a single device must detect varied workpieces reliably. High switching frequency supports fast cycling applications.
M12 Connector Integration
The sensor terminates in an M12 × 1 male connector for quick wiring into standard fieldbus or I/O modules. Its threaded M30 × 1.5 housing fits existing mounting holes without adapters. The wide voltage range and extended temperature tolerance reduce the need for additional signal conditioning or protective enclosures in the control cabinet.
Highlights
- 10 mm switching distance detects metal reliably
- IP68 protection withstands dust and water immersion
- Factor 1 sensing treats all metals equally
- Magnetic-field resistance ensures stable operation near interference
- M12 connector enables quick DC 10…65 V installation
Specifications
| Brand | TURCK |
|---|---|
| Model | BI10-M30-VN4X 1582352 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Does the M30 × 1.5 threaded barrel need a clearance hole or a tapped hole for flush mounting?
The sensor is designed for flush mounting in a threaded M30 × 1.5 hole; the chrome-plated brass housing screws directly into the machine frame without a separate locknut.
Which wiring step on the 4-wire DC connector is most often reversed during installation?
The complementary NPN output uses both normally-open and normally-closed wires; installers frequently swap the black and white conductors at the M12 × 1 plug, inverting the logic.
What part of the sensor degrades first in a high-cycle application and how is it replaced?
The internal switching element wears after extended high-frequency operation; the entire unit is replaced by unplugging the M12 connector and unscrewing the M30 barrel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
