Turck
Turck BI10-M30-AD4X-H1141 44175 Inductive sensor M30×1.5 10…65 VDC M12×1
M30×1.5 threaded inductive sensor detects metal at 10 mm range, operates on 10–65 VDC two-wire DC, and connects via M12×1 male plug
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 10 mm switching distance for reliable detection
- Wide 10…65 VDC supply fits many DC systems
- M12 × 1 connector enables quick installation
- Chrome-plated brass housing resists corrosion
- Flush-mount M30 × 1.5 thread suits metal surfaces
M30 inductive sensor for DC circuits
The Turck BI10-M30-AD4X-H1141 is a flush-mount proximity switch with a 10 mm rated switching distance. A chrome-plated brass barrel houses a 2-wire DC output that operates from 10 to 65 VDC and terminates in an M12 × 1 male connector.
Suited for metal detection in automated lines
This normally-open sensor fits machines that need a simple presence signal without a separate power wire. Builders who require a complementary normally-closed output, a three-wire PNP or NPN interface, or a different thread size should select another model.
Switching distance of 10 mm decides fit
The rated sensing range is fixed at 10 mm for flush mounting in ferrous targets. If the application demands a longer or shorter trigger point, this part will not meet the requirement.
Highlights
- 10 mm switching distance for reliable detection
- Wide 10…65 VDC supply fits many DC systems
- M12 × 1 connector enables quick installation
- Chrome-plated brass housing resists corrosion
- Flush-mount M30 × 1.5 thread suits metal surfaces
Specifications
| Brand | TURCK |
|---|---|
| Model | BI10-M30-AD4X-H1141 44175 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What voltage supply must I already have to power the 10…65 VDC sensor?
The sensor operates on any DC supply between 10 V and 65 V, so your existing power source must fall within that range.
Will the M12 × 1 connector mate with the M12 cables I already use on older machines?
Yes, the male M12 × 1 connector follows the standard M12 pinout and threads, so it connects directly to existing M12 female cables.
How can I confirm the 10 mm switching distance is working after installation?
Bring a metal target to 10 mm from the sensing face; the NO output should close and the indicator LED on the sensor body will light.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
