Turck
Turck BI1.5-EG08-AP6X-V1131/S100 M8 inductive sensor PNP 1.5mm 1030VDC 18g
M8-threaded inductive sensor with 1.5 mm switching distance, PNP NO output, 1030 VDC supply and stainless-steel housing rated to 100 °C
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- PNP output simplifies PLC wiring
- 5 mm sensing range detects small targets
- Stainless-steel 1.4427 housing resists corrosion
- M8 connector enables quick installation
- Operates up to 100 °C in harsh environments
Compact M8 inductive sensor
The Turck BI1.5-EG08-AP6X-V1131/S100 is a flush-mount proximity switch with a 1.5 mm rated switching distance. Its PNP normally-open output suits automation tasks that need a simple presence signal. The M8 × 1 threaded barrel fits standard sensor brackets in tight machine frames.
Thermally stable stainless housing
The 1.4427 stainless steel barrel is rated for ambient temperatures up to +100 °C without derating. DC three-wire operation at 1030 VDC keeps current draw low and electrical noise minimal. No moving parts mean silent, repeatable switching over long cycles.
Connectorised for fast wiring
An M8 × 1 male connector allows plug-and-play cable attachment without tools. The 18 g weight adds negligible mass to moving assemblies. Flush mounting lets the sensor face sit level with surrounding metal for mechanical protection.
Highlights
- PNP output simplifies PLC wiring
- 5 mm sensing range detects small targets
- Stainless-steel 1.4427 housing resists corrosion
- M8 connector enables quick installation
- Operates up to 100 °C in harsh environments
Specifications
| Brand | TURCK |
|---|---|
| Model | BI1.5-EG08-AP6X-V1131/S100 4602221 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How do I install the M8×1 threaded barrel flush and which step is often missed?
Screw the stainless-steel 1.4427 housing into an M8×1 tapped hole until the sensing face sits level with the mounting surface; the step often missed is checking that the 1.5 mm rated switching distance is not reduced by metal shavings or a thick paint layer on the face.
What maintenance or replacement will the PNP NO output sensor need over time?
The sensor has no user-serviceable parts; plan to replace the unit if the PNP output stops switching or the M8×1 connector pins show corrosion, typically after the 3-year parts coverage period.
What is the first limit reached under continuous operation at high temperature?
The housing is rated to +100 °C; sustained operation at that temperature will hit the thermal limit before the 1030 VDC electrical rating becomes a constraint.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
