Tupavco
Tupavco TEX-200 Ethernet Extender Kit 5000ft 300Mbps
Extends a wired network up to 5000 ft over existing phone or twisted-pair cable at up to 300 Mbps with eight selectable profiles and plug-and-play setup
- Extends network reach from 300ft to 5000ft using existing copper wiring
- Delivers up to 300Mbps bandwidth over telephone or twisted-pair lines
- Avoids costly cable upgrades by reusing installed phone or Cat5/6 infrastructure
- Eight selectable profiles via DIP switch adapt performance to line conditions
- G.INP support reduces noise impact for a cleaner, more stable signal
Long-Range Ethernet Extension
The Tupavco TEX-200 kit extends a wired network connection up to 5000ft over existing phone lines or Cat5/6 twisted copper wire. It delivers a maximum bandwidth of 300Mbps, overcoming the standard 300ft copper limit for long-distance LAN links.
Replaces Costly Cable Runs
This extender makes use of already installed telephone or network cabling, removing the need for expensive fibre or new copper infrastructure upgrades. The upgrade is worth it when trenching or pulling fresh cable is impractical or exceeds budget constraints.
Sustained Link Stability
G.INP support reduces sensitivity to noise and interference, helping maintain cleaner signal quality over the full distance. An 8-profile DIP switch lets you tune the connection for the specific line conditions, while plug-and-play operation requires no software configuration.
Highlights
- Extends network reach from 300ft to 5000ft using existing copper wiring
- Delivers up to 300Mbps bandwidth over telephone or twisted-pair lines
- Avoids costly cable upgrades by reusing installed phone or Cat5/6 infrastructure
- Eight selectable profiles via DIP switch adapt performance to line conditions
- G.INP support reduces noise impact for a cleaner, more stable signal
Specifications
No published specifications for this item yet.
Questions about this item
What type of existing cabling does the TEX-200 extender kit require for installation?
The kit works with existing telephone lines using VDSL2 or standard Cat5 and Cat6 twisted-pair network cables.
How are the 8 profile settings selected on the TEX-200 units?
A 4-position DIP switch on each unit is set to one of eight profiles; both ends must match the same profile before powering up.
What indicates that the link is active and at what speed on the TEX-200?
Standard RJ45 ports have LED indicators that show link status and activity for monitoring the connection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
