Tundra
Tundra S3024 3000 W 24 V pure sine wave industrial generator
Converts 24 V DC to 120 V AC pure sine wave at 3000 W continuous and 6000 W peak with 99 percent efficiency
- Pure sine wave output protects sensitive electronics
- 3000 W continuous power runs heavy-duty tools and appliances
- 6000 W peak capacity handles demanding motor start-ups
- 99 percent efficiency reduces battery drain and heat
- LCD remote control enables convenient monitoring from a distance
Industrial inverter for 24 V systems
The Tundra S3024 is a pure sine wave inverter built for industrial and mobile applications that run from a 24 V DC source. It delivers 3,000 W of continuous AC power with a 6,000 W peak rating for motor starts and heavy inrush loads.
Continuous 3,000 W at 99 % efficiency
The unit sustains 3,000 W output while converting DC to 120 V AC at 60 Hz with 99 % efficiency. Two hardwired NEMA 5-15R outlet blocks and an LCD remote control are included for fixed or panel installations.
Suited for permanent 24 V installations needing
Installers who require hardwired connections and remote monitoring will benefit. Buyers needing portable plug-in outlets, 12 V input, or higher continuous wattage should look at other models.
Highlights
- Pure sine wave output protects sensitive electronics
- 3000 W continuous power runs heavy-duty tools and appliances
- 6000 W peak capacity handles demanding motor start-ups
- 99 percent efficiency reduces battery drain and heat
- LCD remote control enables convenient monitoring from a distance
Specifications
| Brand | TUNDRA |
|---|
Questions about this item
What can the 3,000 W continuous rating actually run at once?
The 3,000 W continuous output supports typical 120 V AC loads such as power tools, appliances or electronics up to that combined wattage.
How does the 24 V DC input and 120 V AC output limit what I can connect?
You must supply 24 V DC from a battery bank or similar source; the unit then delivers 120 V AC at 60 Hz through hardwired or NEMA 5-15R connections.
Will the 22 5/8 in depth, 10 3/4 in width and 4 1/8 in height fit in my equipment rack?
The steel case measures 22 5/8 in deep, 10 3/4 in wide and 4 1/8 in high; verify your rack clearance against those dimensions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
