Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00940032BTC
In stock
Tuff Stuff
Tuff Stuff TUF016 Door Lock 2-5/8 in Diameter Prime Coated
A steel cover plate conceals old lock holes up to 2-1/8 inch on doors up to 1-3/4 inch thick, maintaining entry security with a prime-coated finish
- FinishBright Brass
- KeyingKeyed Different
- Covers holes from 1/2" to 2-1/8" with a 2-5/8" diameter plate
- Maintains door security where knob latch or deadbolt hardware is no longer used
- Prime coated steel surface ready for finishing paint or primer
- Fits doors up to 1-3/4" thick for standard entry applications
- Dummy cylinder design conceals hardware holes without replacing lock mechanism
What this cover plate does
The Tuff Stuff TUF016 is a steel door hole cover plate with a 2-5/8 inch outside diameter. It conceals existing bore holes ranging from 1/2 inch to 2-1/8 inch on doors up to 1-3/4 inch thick. The prime-coated finish allows the plate to be painted to match surrounding hardware. It is intended for entry doors where knob latch or deadbolt hardware has been removed.
No moving parts or power draw
Because the plate is a passive steel component it generates no heat, produces no noise and draws no electrical power. Installation relies on simple mechanical fastening rather than any active system. Normal use therefore adds no thermal load and requires no ongoing energy cost.
Prime coating simplifies finishing
The factory-applied prime coating means the surface is ready for paint without additional preparation. Buyers who want a different finish can apply topcoat directly, while those who prefer the original look can leave it as supplied. The plate includes no lock mechanism, so it cannot replace a functioning latch or deadbolt.
Highlights
- Covers holes from 1/2" to 2-1/8" with a 2-5/8" diameter plate
- Maintains door security where knob latch or deadbolt hardware is no longer used
- Prime coated steel surface ready for finishing paint or primer
- Fits doors up to 1-3/4" thick for standard entry applications
- Dummy cylinder design conceals hardware holes without replacing lock mechanism
Specifications
| Brand | TUFF STUFF LOCKS SECURITY |
|---|---|
| Model | TUF016 |
| Finish | Bright Brass |
| Keying | Keyed Different |
Questions about this item
How do I install the TUF016 cover plate on a 1-3/4 inch thick door?
Align the 2-5/8 inch steel plate over the existing hole, insert the supplied fasteners through the door face, and tighten until the prime-coated surface sits flush without gaps.
Will the prime coating on this steel cover plate need repainting later?
The factory prime coat is a base layer; apply a compatible topcoat after installation to match your door finish and protect the steel from moisture.
What is the largest hole diameter this plate can conceal on an entry door?
It covers holes up to 2-1/8 inch in diameter, so any opening larger than that will remain partially exposed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
