tuanyuan
tuanyuan CPU Cooling Fan DV4650-470 230VAC 120/110mA 120*120*38MM
Replaces a faulty 120×120×38 mm axial fan in DV4650-470 cabinets, running on 230 VAC at 120/110 mA
- Accessory TypeCooler
- ColorBlack
- Replaces faulty DV4650-470 fan with exact fit
- 230 VAC axial motor runs at 120/110 mA
- 120×120×38 mm frame matches original dimensions
- Plug-and-play flex cable uses 2-to-6-pin connector
- Pre-tested unit restores normal cooling and quiet operation
Precise DV4650-470 Replacement
This new tuanyuan cooling fan is built as a direct drop-in for the DV4650-470 axial unit. It targets laptop owners and technicians who need to swap a failed or noisy original without modifications. The integrated flex cable uses a multi-pin connector for plug-and-play installation, though the supplier notes that special skill is required for proper fitting.
230 VAC Rating and 120/110 mA Draw
The fan runs on 230 VAC mains voltage, drawing either 120 mA or 110 mA depending on operating conditions. That power profile suits the specific cabinet chassis it was designed for. It will not suit low-voltage laptop headers or any system expecting 5 V or 12 V DC input, so builders working on standard notebook mainboards should look elsewhere.
120x120x38 mm Black Frame
The black housing measures 120 by 120 by 38 mm, matching the original footprint exactly. A 0-1 cm measurement tolerance applies, so verify the cut-out before ordering. The supplier tests every unit before shipping and advises fitting only while the device is powered off, reducing the risk of short circuits during replacement.
Highlights
- Replaces faulty DV4650-470 fan with exact fit
- 230 VAC axial motor runs at 120/110 mA
- 120×120×38 mm frame matches original dimensions
- Plug-and-play flex cable uses 2-to-6-pin connector
- Pre-tested unit restores normal cooling and quiet operation
Specifications
| Accessory Type | Cooler |
|---|---|
| Color | Black |
Questions about this item
Will this 120*120*38 mm axial fan fit the existing mounting holes in my DV4650-470 cabinet?
The fan is built to the 120*120*38 mm footprint used by the DV4650-470 chassis, so the original screw pattern lines up without modification.
How can I verify the replacement is running correctly once installed?
Power the system and confirm the fan spins smoothly at 230 VAC, draws roughly 120/110 mA, and eliminates the previous error, noise or overheating symptoms.
Does the package include the flex cable and connector, or must I source them separately?
The unit ships with an integrated flex cable that terminates in a 2-pin, 3-pin, 4-pin, 5-pin or 6-pin plug for direct mainboard connection — no extra parts are required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



