TSUJ
TSUJ Kepler-C72J-OYS-0110 12V 0.10A 70mm 3-Wire Fan
12 V, 0.10 A cooling fan, 70 mm frame, three-wire connection
- Featuresfor P1127010LB1F 12V 0.10A 1.20W 70X70X10MM 3-Wire Cooling F
- Low power draw with 0.10 A at 12 V
- Compact 70 mm square frame fits tight spaces
- 3-wire connection enables speed monitoring
- 20 W rating keeps energy use minimal
70 mm 3-wire cooling fan
This 70 mm TSUJ fan operates at 12 V and draws 0.10 A for a rated power of 1.20 W. The three-wire connector provides speed reporting for monitoring. It fits the 70×70×10 mm footprint specified for the P1127010LB1F reference.
Direct replacement for P1127010LB1F
The Kepler-C72J-OYS-0110 matches the voltage, current and physical dimensions of the original P1127010LB1F unit. Builders needing a different connector type or a higher airflow rating will need a different model.
Highlights
- Low power draw with 0.10 A at 12 V
- Compact 70 mm square frame fits tight spaces
- 3-wire connection enables speed monitoring
- 20 W rating keeps energy use minimal
Specifications
| Brand | TSUJ |
|---|---|
| Part Number | Kepler-C72J-OYS-0110 |
| Features | for P1127010LB1F 12V 0.10A 1.20W 70X70X10MM 3-Wire Cooling Fan |
Questions about this item
Does the 3-wire tachometer on the TSUJ Kepler-C72J-OYS-0110 need periodic cleaning?
The tachometer signal wire reports speed but has no moving parts; only the rotor and sleeve bearing accumulate dust and should be cleaned with compressed air when airflow drops.
At 0.10 A and 12 V the fan draws 1.20 W — does that power limit cap airflow before the 70 mm blade reaches full RPM?
The 1.20 W rating is the steady-state electrical input; the motor reaches its design RPM within that envelope, so the power figure itself is not a bottleneck under normal sustained operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Baldwin Filters
Baldwin Filters RS3922 air filter 14 3/4 in height 6 3/8 in width
$47.99
0.00057155BTC
In stock
