Tronsmart
Tronsmart ZK-302 Blood Pressure Monitor Blue
A compact fingertip pulse oximeter with a coloured LED display measuring oxygen saturation from 35 to 100 per cent and pulse rate up to 250 bpm, running 30 hours on two AAA batteries and weighing 69 g
- ColorElectric Blue
- Optionno Bluetooth
- Simple one-button operation for quick spot checks
- Coloured LED display shows SpO₂ 35-100 % and pulse 30-250 bpm
- Compact 5.8 x 3.0 x 3.0 cm design weighs just 69 g
- Up to 30 hours continuous use from two AAA batteries
- Auto power-off after 8 seconds with no signal saves energy
Portable fingertip oximeter
The Tronsmart ZK-302 is a compact fingertip pulse oximeter designed for spot-checking blood oxygen saturation and heart rate. Its single-button operation and lightweight 69 g body make it simple for anyone to carry and use at home, during travel or after exercise.
Low power draw and quiet operation
The device runs on two AAA alkaline batteries (not included) and draws less than 30 mA, providing up to 30 hours of continuous measurement. An automatic shut-down activates after eight seconds without a signal, and a low-voltage indicator alerts you when fresh batteries are needed.
Clinical-grade SpO₂ accuracy
The coloured LED display shows oxygen saturation from 35 % to 100 % with 1 % resolution and 2 % accuracy across the 70 %–99 % range, while heart-rate measurement covers 30–250 bpm with 2 bpm accuracy and reliable performance at 0.3 % perfusion.
Highlights
- Simple one-button operation for quick spot checks
- Coloured LED display shows SpO₂ 35-100 % and pulse 30-250 bpm
- Compact 5.8 x 3.0 x 3.0 cm design weighs just 69 g
- Up to 30 hours continuous use from two AAA batteries
- Auto power-off after 8 seconds with no signal saves energy
Specifications
| Color | Electric Blue |
|---|---|
| Option | no Bluetooth |
Questions about this item
How do I start a reading on the ZK-302 finger oximeter?
Insert two AAA batteries, place a fingertip fully inside the sensor, then press the single button once; the coloured LED display shows SpO₂ and pulse rate within seconds.
What ongoing upkeep does the ZK-302 require?
Replace the two AAA alkaline batteries after roughly 30 hours of measurements; the low-voltage indicator appears on screen when power is running low.
At what oxygen-saturation level does the ZK-302 stop giving reliable readings?
Accuracy is specified as ±2 % between 70 % and 99 % SpO₂; below 70 % the stated tolerance no longer applies.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
