Tritan
Tritan UCP206-30MM Pillow Block Bearing collectible
A cast-iron pillow block bearing with a 30 mm bore, double-sealed radial ball insert and two-bolt mounting for fixed shaft support
- TypeBearings, V-belts & Power Transmission Equipment
- ColorBlue
- Durable cast-iron housing withstands heavy industrial loads
- 30 mm bore fits standard shaft dimensions precisely
- Double-sealed closure keeps contaminants out reliably
- Operates from -40 °C to 120 °C temperature range
- Pre-lubricated with grease for immediate installation
Tritan UCP206-30MM Pillow Block Bearing
This pillow block bearing supports a 30 mm shaft with a cast iron housing and double-sealed radial ball insert. It suits maintenance crews and original-equipment builders who need a fixed, bolt-through unit rated from -40 °C to 120 °C. The TRITAN brand marks it as new-old-stock collectible hardware.
Mounting constraints and temperature envelope
Two bolt holes spaced 121 mm centre-to-centre fix the 17 mm high, 44 mm wide base to the frame. The fixed expansion type allows no axial float, so shaft alignment must be precise before tightening the set screws. Operating limits stop at 120 °C maximum and -40 °C minimum.
Replaces worn fixed pillow blocks
The unit directly swaps for any failed fixed pillow block with the same 30 mm bore, 121 mm bolt pattern and 42.8 mm centre height. The jump is worth it when the old housing is cracked, seals are lost or the insert runs rough and a new cast-iron, grease-lubricated replacement restores rated load capacity.
Highlights
- Durable cast-iron housing withstands heavy industrial loads
- 30 mm bore fits standard shaft dimensions precisely
- Double-sealed closure keeps contaminants out reliably
- Operates from -40 °C to 120 °C temperature range
- Pre-lubricated with grease for immediate installation
Specifications
| Brand | TRITAN |
|---|---|
| Type | Bearings, V-belts & Power Transmission Equipment |
| Color | Blue |
Questions about this item
What bore size should I select for a 30 mm shaft?
The UCP206-30MM bearing has a 30 mm cylindrical bore that matches a 30 mm shaft directly.
How much radial space does the 42.8 mm center height add to my frame?
The pillow block sits 42.8 mm from the mounting surface to the bearing centre, so the shaft centreline will be 42.8 mm above the base.
What does the 121 mm bolt-hole spacing limit in my design?
The two mounting holes are fixed at 121 mm centre-to-centre both lengthwise and widthwise, so the frame must provide that exact bolt pattern.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tour Edge Golf Mfg. Inc.
Tour Edge Golf Mfg. Inc. pdprsu0138 golf accessory
- Toys and Games
$58.99
0.00070562BTC
In stock