We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cast iron pillow block bearing, blue finish, 47mm bore

Tritan

Tritan UCP202-10 47MM Pillow Block Bearing collectible

SKU CH-VSCR-6V5AA

Cast-iron pillow block bearing with 5/8 in bore, double-sealed alloy-steel insert, grease-lubricated for -40 to 250 °F operation

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorBlue
  • Durable cast-iron housing resists heavy loads
  • Double-sealed closure keeps contaminants out
  • Pre-lubricated with grease for immediate use
  • Operates from -40 to 250 degrees F
  • 5/8 inch bore fits standard shafts

Industrial pillow block bearing

The Tritan UCP202-10 is a cast-iron pillow block bearing with a 5/8 in cylindrical bore and set-screw locking. It suits maintenance teams and OEM builders who need a fixed, double-sealed radial ball insert for power-transmission shafts in conveyors, fans or agricultural equipment.

Double-sealed grease lubrication

Factory-filled grease and dual seals keep contaminants out from -40 °F to 250 °F without relubrication intervals. The alloy-steel insert runs on fixed expansion, so the unit arrives ready to bolt down and run without extra seals, adapters or oil systems.

Cast-iron housing with bolt-through mounting

Blue-finished cast iron provides rigidity for shock loads while the 3 47/64 in square bolt pattern matches common UCP footprints. The 0.551 in base height and 1.496 in base width sit low on frames, and the 1 11/64 in centre height aligns standard shaft centres without shims.

Highlights

  • Durable cast-iron housing resists heavy loads
  • Double-sealed closure keeps contaminants out
  • Pre-lubricated with grease for immediate use
  • Operates from -40 to 250 degrees F
  • 5/8 inch bore fits standard shafts

Specifications

BrandTRITAN
TypeBearings, V-belts & Power Transmission Equipment
ColorBlue

Questions about this item

How often should I re-grease the bearing insert on the Tritan UCP202-10?

The unit arrives factory-filled with grease; re-lubricate through the fitting at intervals suited to your load, speed and environment, using a compatible NLGI grade.

What temperature limit will the Tritan UCP202-10 reach first during continuous operation?

The housing and seals are rated to a maximum of 250 Degrees F; sustained running above that temperature will degrade the grease and seal material.

How much heat does the cast-iron housing dissipate when the bearing runs all day?

The cast-iron housing conducts heat away from the radial ball insert, keeping surface temperatures within the -40 to 250 Degrees F operating window under normal loads.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.