We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue cast iron pillow block bearing with eccentric locking collar

Tritan

Tritan HCP207-20 Pillow Block Bearing Cast Iron Eccentric

SKU CH-VRZF-AVF17

A cast-iron pillow block bearing with eccentric locking, double-sealed radial ball insert and 1 1/4 in cylindrical bore for bolt-through mounting

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorBlue
  • Cast iron housing resists heavy loads
  • Eccentric collar locks securely to 1 1/4 in shaft
  • Double seals keep grease in and contaminants out
  • Operates reliably from -40 to 250 °F
  • 5 in bolt centres simplify mounting

TRITAN HCP207-20 Pillow Block

This new TRITAN HCP207-20 pillow block bearing features a cast iron housing with a blue finish. It uses a radial ball bearing insert made from alloy steel with double seals and grease lubrication. The unit mounts via bolt-through holes on a 5 in by 5 in center pattern.

1-1/4 in Cylindrical Bore

The bore diameter is 1 1/4 in with a cylindrical profile that fits straight shafts. The eccentric locking collar secures the inner ring without a setscrew or adapter sleeve. This single dimension decides whether the bearing matches your shaft.

Fixed Expansion Across -40 to 250 °F

The fixed expansion type holds axial position while the grease lubricant functions from -40 °F to 250 °F. The cast iron housing and double seals handle moderate contaminant exposure. Extreme speeds, heavy shock loads or continuous operation at the temperature limits will reduce service life.

Highlights

  • Cast iron housing resists heavy loads
  • Eccentric collar locks securely to 1 1/4 in shaft
  • Double seals keep grease in and contaminants out
  • Operates reliably from -40 to 250 °F
  • 5 in bolt centres simplify mounting

Specifications

BrandTRITAN
TypeBearings, V-belts & Power Transmission Equipment
ColorBlue

Questions about this item

How does the 1 7/8 in center height affect installation in a machine?

The 1 7/8 in center height sets the shaft centerline above the mounting surface. Verify this dimension matches your frame design before bolting the unit in place.

What does the 5 in mount hole center-to-center dimension limit?

The 5 in bolt pattern fixes the foot spacing. Your structure must provide matching holes on 5 in centers in both length and width directions.

What clearance is needed for the 1.889 in base width and .708 in base height?

The housing footprint measures 1.889 in wide by .708 in tall at the base. Ensure the mounting pad accommodates this rectangle and bolt access.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.