We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue cast iron pillow block bearing, double sealed, eccentric locking collar, 1 3/16 inch bore

Tritan

Tritan HCP206-19 Eccentric Pillow Block Bearing Collectible

SKU CH-F8X7-150D9

A new cast-iron pillow block bearing with a 1 3/16 in bore, double-sealed radial ball insert, and bolt-through mounting

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorBlue
  • Cast iron housing resists heavy industrial loads
  • Double-sealed closure keeps grease in and dirt out
  • Fixed expansion design maintains shaft alignment under vibration
  • Operates from -40 °F to 250 °F for extreme environments
  • Bolt-through mount with 4 3/4 in hole centres simplifies installation

Collectible Cast-Iron Pillow Block Bearing

This new TRITAN HCP206-19 eccentric pillow block bearing is a collectible piece of power-transmission hardware. It features a cast-iron housing finished in blue with a double-sealed radial ball insert made from alloy steel. The unit suits enthusiasts who preserve industrial components or display vintage mechanical parts.

Fixed Housing With Grease Lubrication

The bearing operates across a temperature range of -40 to 250 degrees F using factory grease lubrication. Its fixed expansion type and bolt-through mount provide a stationary fit without thermal growth compensation. The cast-iron construction and sealed closure limit noise and resist contamination during normal running.

1 3/16 Inch Cylindrical Bore Decides Fit

The single specification that determines suitability is the 1 3/16 inch cylindrical bore diameter. Only shafts matching this exact size will seat correctly in the eccentric locking collar. Buyers needing a different bore size, a set-screw locking method, or a split housing must select another part.

Highlights

  • Cast iron housing resists heavy industrial loads
  • Double-sealed closure keeps grease in and dirt out
  • Fixed expansion design maintains shaft alignment under vibration
  • Operates from -40 °F to 250 °F for extreme environments
  • Bolt-through mount with 4 3/4 in hole centres simplifies installation

Specifications

BrandTRITAN
TypeBearings, V-belts & Power Transmission Equipment
ColorBlue

Questions about this item

How do I bolt the HCP206-19 pillow block to a frame and what step is often missed?

Fasten through the 4 3/4 in centre-to-centre holes in both directions; the step often missed is checking that the 0.669 in base height aligns with the shaft centreline before tightening.

What maintenance will the eccentric locking collar and double-sealed insert need later?

Re-grease through the fitting at intervals suited to the -40 to 250 °F range; inspect the collar set-screw torque and seal condition during each service.

Which limit appears first when the bearing runs continuously at high load?

The 250 °F maximum temperature limit is reached before the grease life or the cast-iron housing yield become critical.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.