We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel sprocket with 36 teeth, black oxide finish, 9.02 in diameter

Tritan

Tritan 60SK36 Quick Detachable Sprocket 36T collectible

SKU CH-T778-481TP

A 36-tooth ANSI 60 roller-chain sprocket with a quick-detachable SK bushing, 9.02 in outside diameter and hardened-steel construction

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorTransparent
  • 36-tooth design matches ANSI 60 chain pitch 3/4 in
  • Quick-detachable SK bushing allows fast sprocket changes
  • 02 in outside diameter fits standard drive layouts
  • Black oxide finish resists corrosion in harsh environments
  • Heat-treated steel teeth extend service life under load

Precision 36-Tooth Chain Sprocket

The Tritan 60SK36 is a single-strand roller-chain sprocket built to ANSI B 29.1 dimensions. It suits maintenance engineers and equipment builders who need a direct replacement for worn drive components on conveyors or industrial machinery.

Quick-Detachable SK Bushing Mount

This sprocket accepts a standard SK quick-detachable bushing, allowing removal without pulling shafts or motors. The design saves downtime when chain stretch or tooth wear demands a swap, and the black-oxide finish resists corrosion in humid plant environments.

Steel Hub for Single-Strand 60 Chain

The 3 7/8 in hub diameter and 2 1/8 in length through bore centre the sprocket on the bushing, while the .459 in tooth width matches #60 chain exactly. Teeth are not hardened, so the sprocket works best in moderate-load drives where frequent replacement is planned.

Highlights

  • 36-tooth design matches ANSI 60 chain pitch 3/4 in
  • Quick-detachable SK bushing allows fast sprocket changes
  • 02 in outside diameter fits standard drive layouts
  • Black oxide finish resists corrosion in harsh environments
  • Heat-treated steel teeth extend service life under load

Specifications

BrandTRITAN
TypeBearings, V-belts & Power Transmission Equipment
ColorTransparent

Questions about this item

What size SK bushing does the 36-tooth sprocket need?

It requires an SK bushing with a maximum bore of 2 5/8 in and a hub projection of 1.666 in.

How do I install the quick-detachable sprocket on the shaft?

Place the SK bushing on the shaft, slide the sprocket over it, insert and tighten the cap screws evenly to draw the hub onto the taper, then torque to the bushing maker's spec.

When should I replace the sprocket because of tooth wear?

Replace it when the 0.459 in tooth width shows visible hooking or the chain rollers no longer seat cleanly in the 36 tooth gaps.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.