We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black oxide steel sprocket with 22 teeth and keyway

Tritan

Tritan 60BS22H 22-tooth sprocket 60 chain collectible

SKU CH-Y6P1-TMKK9

A 22-tooth steel sprocket for 60 chain with a finished 1 1/4 inch bore, keyway, set screws and black oxide finish

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorTransparent
  • Precision power transmission with 22-tooth 60 chain sprocket
  • Secure shaft mounting via 1/4 in keyway and dual set screws
  • Durable steel construction with black oxide finish resists wear
  • Accurate chain engagement at 5.27 in pitch diameter
  • Ready-to-install finished bore with 1 1/4 in diameter

New steel sprocket for 60 chain

This 22-tooth sprocket fits 60 chain with a 3/4 inch pitch and a finished 1 1/4 inch bore. It is made from steel with a black oxide finish and includes a keyway plus two set screws for secure mounting. Collectors and maintenance teams can use it as a display piece or a direct replacement part. It is not for buyers who need a different chain pitch or a bore size not listed here.

Keyway and set screws included

The 1/4 inch wide by 1/8 inch deep keyway mates with a standard key to prevent rotation on the shaft. Two set screws provide additional locking force without extra hardware. This combination means the sprocket can be installed and secured in one step. It does not suit applications that require a split hub or a taper-lock bushing instead.

Straightforward shaft mounting

Slide the sprocket onto a 1 1/4 inch shaft, align the key in the keyway, and tighten the two set screws. The hub projection of .791 inch and hub diameter of 4 inch give enough length for a firm grip. Misalignment or an undersized shaft are the typical issues that cause wobble or premature wear. No special tools are required beyond standard hex keys.

Highlights

  • Precision power transmission with 22-tooth 60 chain sprocket
  • Secure shaft mounting via 1/4 in keyway and dual set screws
  • Durable steel construction with black oxide finish resists wear
  • Accurate chain engagement at 5.27 in pitch diameter
  • Ready-to-install finished bore with 1 1/4 in diameter

Specifications

BrandTRITAN
TypeBearings, V-belts & Power Transmission Equipment
ColorTransparent

Questions about this item

How often will the 22-tooth steel sprocket need replacement under normal use?

A 22-tooth steel sprocket with black oxide finish lasts until chain stretch wears the tooth profile; inspect every few hundred hours and replace when teeth show hooked wear.

What limit appears first when the 60-chain sprocket runs continuously at load?

Tooth wear from chain articulation becomes the limiting factor before the 1 1/4 in bore or keyway shows distress.

How much heat and noise does the finished-bore sprocket generate during all-day operation?

The steel sprocket itself runs silently and adds negligible heat; noise and temperature come from the chain mesh and bearings, not the 5.67 in outside diameter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.