We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black oxide steel sprocket with 18 teeth, 1 inch bore, keyway and set screws

Tritan

Tritan 60BS18H Sprocket 60 Chain 18 Teeth 1in Bore Keyway

SKU CH-6RXE-M8QBG

A steel sprocket with 18 teeth for 60 chain, 1in bore with keyway and set screws, 4.7in outside diameter and 4.319in pitch diameter

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorTransparent
  • Fits 60 chain with 18 teeth for precise power transmission
  • 1 in bore with 1/4 in keyway and two set screws for secure mounting
  • Black oxide finish on steel resists corrosion in demanding environments
  • 7 in outside diameter and 4.319 in pitch diameter match standard chain geometry
  • .791 in hub projection and 3 1/2 in hub diameter provide rigid shaft support

Industrial power-transmission sprocket

The Tritan 60BS18H is a finished-bore steel sprocket with 18 teeth cut for #60 roller chain. A 1 in bore with a 1/4 in keyway and two set screws provides a positive mechanical lock on the shaft. It is aimed at maintenance engineers and OEM assemblers who need a ready-to-mount replacement for conveyors, drives or agricultural equipment.

Verify chain size shaft and key dimensions

Confirm that the drive uses #60 chain with a 3/4 in pitch and that the shaft diameter is exactly 1 in. Check the keyway width of 1/4 in and depth of 1/8 in against the shaft keyseat. Ensure the 1 1/4 in length through bore clears any adjacent collars or bearings and that the 3 1/2 in hub diameter fits within the available radial space.

Black-oxide steel with set-screw retention

The carbon-steel body carries a black-oxide finish for corrosion resistance in industrial environments. Two included set screws bear directly on the key to prevent axial drift under reversing loads. The 0.791 in hub projection keeps the sprocket close to the bearing housing, reducing overhung moment. No lubrication fittings are present, so chain lube must reach the teeth from the outside.

Highlights

  • Fits 60 chain with 18 teeth for precise power transmission
  • 1 in bore with 1/4 in keyway and two set screws for secure mounting
  • Black oxide finish on steel resists corrosion in demanding environments
  • 7 in outside diameter and 4.319 in pitch diameter match standard chain geometry
  • .791 in hub projection and 3 1/2 in hub diameter provide rigid shaft support

Specifications

BrandTRITAN
TypeBearings, V-belts & Power Transmission Equipment
ColorTransparent

Questions about this item

What comes in the box and what must I buy separately?

The sprocket ships with two set screws and a machined keyway; chain, key stock and lubricant are not included.

How do I choose between the available versions or capacities?

This model is a single-strand 60-chain sprocket with 18 teeth and a 1-inch bore; no other tooth counts or bore sizes are offered for this part number.

What does the 4.7-inch outside diameter mean when the sprocket is mounted?

The 4.7-inch outside diameter sets the chain wrap radius, while the 4.319-inch pitch diameter determines the speed ratio with the driven sprocket.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.