We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black oxide steel sprocket with 16 teeth, 1 1/8 inch bore and keyway

Tritan

Tritan 60BS16H 16T 60 Chain 1 1/8in Bore Keyway collectible

SKU CH-CQSR-ECT4N

Steel 60 chain sprocket with 16 teeth, 1 1/8 in fixed bore, keyway and set screws included

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorTransparent
  • Hardened steel teeth resist wear on 60 chain drives
  • 16-tooth profile matches 3/4-inch pitch for smooth engagement
  • 1 1/8-inch finished bore with 1/4-inch keyway locks to shaft
  • Black oxide finish protects against corrosion in harsh environments
  • Two set screws and 0.791-inch hub projection secure alignment

Tritan 60BS16H Sprocket for 60 Chain

The Tritan 60BS16H is a finished-bore steel sprocket built for single-strand 60 chain. It suits maintenance teams and equipment builders who need a direct replacement on existing shafts. The 1 1/8 in bore with keyway and two set screws locks onto the shaft without additional machining.

16 teeth on 3.845 in pitch diameter

Sixteen teeth on a 3.845 in pitch diameter engage 3/4 in pitch chain reliably. The 4.22 in outside diameter provides full wrap for standard loads. Hub projection of .791 in and 3 1/16 in hub diameter keep the assembly compact where shaft spacing is tight.

Black oxide steel with fixed bore

Black oxide finish on steel resists surface corrosion in workshop environments. The fixed 1 1/8 in bore includes a 1/4 in wide by 1/8 in deep keyway plus two set screws for positive drive. Length through bore of 1 1/4 in matches common hub widths. Buyers needing a different bore size or split-hub mounting will need another part.

Highlights

  • Hardened steel teeth resist wear on 60 chain drives
  • 16-tooth profile matches 3/4-inch pitch for smooth engagement
  • 1 1/8-inch finished bore with 1/4-inch keyway locks to shaft
  • Black oxide finish protects against corrosion in harsh environments
  • Two set screws and 0.791-inch hub projection secure alignment

Specifications

BrandTRITAN
TypeBearings, V-belts & Power Transmission Equipment
ColorTransparent

Questions about this item

Will the 1 1/8 in bore with 1/4 in keyway fit the shaft on my existing #60 chain drive?

The sprocket has a fixed 1 1/8 in bore, 1/4 in keyway width and 1/8 in keyway depth, matching a standard shaft and key for #60 chain.

How can I verify the 16-tooth sprocket is seated correctly after installation?

Check that the 4.22 in outside diameter runs true, the 3.845 in pitch diameter engages the chain smoothly, and the two set screws lock against the key.

Does the box include the two set screws or must I source them separately?

The finished bore sprocket ships with two set screws included; no additional fasteners are required for mounting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.