Tritan
Tritan 6007 2RS/C3 PRX Radial Ball Bearing collectible
A new radial ball bearing with 35 mm bore, 62 mm outside diameter and double-sealed construction for oily environments
- TypeBearings, V-belts & Power Transmission Equipment
- ColorTransparent
- Precision fit with 35 mm bore tolerance of +0/-0.012 mm
- Smooth operation from AISI 52100 alloy steel balls
- Contamination resistance via double sealed contact design
- Reliable load handling with 3,600 lbf dynamic capacity
- Durable construction using alloy steel rings and steel cage
Industrial radial ball bearing
This TRITAN 6007 2RS/C3 PRX bearing is a new metric radial ball bearing for machinery that requires a 35 mm bore and 62 mm outside diameter. It suits maintenance engineers and OEM assemblers who need a direct industry-number replacement.
Double-sealed for oily environments
The contact seals on both sides retain Polyrex EM lubricant and exclude contaminants in greasy or oily conditions. An alloy-steel cage and AISI 52100 balls support a 3,600 lbf dynamic radial load without a retaining ring.
Ready-to-install component
The bearing ships pre-lubricated and sealed, so no initial greasing or seal fitting is required. The ABEC 1 tolerance of +0/-0.012 mm on the bore ensures a standard press fit on a 35 mm shaft.
Highlights
- Precision fit with 35 mm bore tolerance of +0/-0.012 mm
- Smooth operation from AISI 52100 alloy steel balls
- Contamination resistance via double sealed contact design
- Reliable load handling with 3,600 lbf dynamic capacity
- Durable construction using alloy steel rings and steel cage
Specifications
| Brand | TRITAN |
|---|---|
| Type | Bearings, V-belts & Power Transmission Equipment |
| Color | Transparent |
Questions about this item
How long will the 6007 bearing last under a continuous 3,600 lbf radial load?
The dynamic radial load capacity is rated at 3,600 lbf, which is used to calculate the theoretical L10 fatigue life under sustained operation.
How much heat does the Polyrex EM lubricant generate at full speed?
The contact seals and Polyrex EM grease are designed for oily or greasy environments, helping to manage friction and temperature during all-day running.
What shaft diameter is required for the 35 mm bore with a +0/-0.012 mm tolerance?
A 35 mm shaft manufactured to a matching tolerance class is needed to achieve the correct interference fit for the inner ring.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tour Edge Golf Mfg. Inc.
Tour Edge Golf Mfg. Inc. pdprsu0138 golf accessory
- Toys and Games
$58.99
0.00070815BTC
In stock