We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Tritan

Tritan 5303 ZZ/C3 PRX Angular Contact Ball Bearing 17 mm Bore

SKU CH-ZPK9-TGTKV

Angular contact ball bearing with 17 mm bore, 47 mm outside diameter and 12,000 RPM maximum speed

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorTransparent
  • Double-shielded closure keeps contaminants out
  • 17 mm bore fits standard shaft sizes
  • 12,000 RPM maximum speed supports high-speed operation
  • Operating range from -40 °C to 175 °C handles extreme temperatures
  • Polyamide cage with SRI 2 and Polyrex EM grease ensures smooth running

Precision Angular Bearing 17 mm

This new Tritan angular contact ball bearing uses a 17 mm bore and 47 mm outside diameter. Two rows of alloy steel balls run in a polyamide cage with double shields. SRI 2 and Polyrex EM grease fill the unit for operation from minus 40 to 175 degrees Celsius at speeds up to 12,000 RPM.

Suits High Speed Precision

Builders needing a single 5303 series bearing with a 22.2 mm width for radial and axial loads will find the correct fit. Buyers who require a matched pair, a different bore size, or a sealed variant should select another part.

Bore Diameter Decides Fit

The 17 mm bore diameter is the critical dimension that determines whether this bearing mates with your shaft. Verify the shaft size before ordering because no other dimension can compensate for a bore mismatch.

Highlights

  • Double-shielded closure keeps contaminants out
  • 17 mm bore fits standard shaft sizes
  • 12,000 RPM maximum speed supports high-speed operation
  • Operating range from -40 °C to 175 °C handles extreme temperatures
  • Polyamide cage with SRI 2 and Polyrex EM grease ensures smooth running

Specifications

BrandTRITAN
TypeBearings, V-belts & Power Transmission Equipment
ColorTransparent

Questions about this item

What shaft diameter fits the 17 mm bore?

The 17 mm bore fits a 17 mm shaft with the correct tolerance for an angular contact bearing

Will the polyamide cage handle the 12 000 RPM limit with my existing steel races?

The polyamide cage is rated for the 12 000 RPM maximum speed alongside alloy steel rings and balls

How do I confirm the double shields are seated after press-fitting the 47 mm outside diameter?

Verify both shields sit flush in the outer ring grooves and the inner ring rotates freely without shield contact

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.