We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Tritan

Tritan 5200 ZZ/C3 PRX angular contact ball bearing 10 mm bore 30 mm OD 850 lb

SKU CH-F69Y-CHMVN

Double-shielded angular contact ball bearing with 10 mm bore, 30 mm OD, 14.3 mm width, 19,000 RPM limit and 850 lb capacity

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorTransparent
  • High load capacity with 850 lb rating
  • High-speed operation up to 19,000 RPM
  • Wide temperature range from -40 to 175 °C
  • Double-shielded closure keeps contaminants out
  • Compact 10 mm bore fits tight assemblies

Angular contact bearing 5200 ZZ/C3 PRX

The TRITAN 5200 ZZ/C3 PRX is an angular contact ball bearing built for precision rotation. It suits machinery that requires combined radial and axial load support in a single component.

850 lb capacity with 19,000 RPM limit

The bearing carries a dynamic load rating of 850 lb and reaches a maximum speed of 19,000 RPM. It operates reliably from -40 °C to 175 °C using SRI 2 and Polyrex EM grease, running out of headroom beyond those thermal or speed limits.

Upgrade from standard radial bearings

This unit replaces basic deep-groove bearings when thrust loads exceed their capacity. The jump is worth it for spindles or gearboxes that see sustained axial force, but it is not for applications needing matched pair sets or higher bore diameters.

Highlights

  • High load capacity with 850 lb rating
  • High-speed operation up to 19,000 RPM
  • Wide temperature range from -40 to 175 °C
  • Double-shielded closure keeps contaminants out
  • Compact 10 mm bore fits tight assemblies

Specifications

BrandTRITAN
TypeBearings, V-belts & Power Transmission Equipment
ColorTransparent

Questions about this item

Will this 10 mm bore, 30 mm OD angular contact bearing fit the same shaft and housing as my current 5200 series unit?

Yes, the bore is 10 mm and the outside diameter is 30 mm, matching the standard 5200 envelope, so it interchanges directly with other 5200 bearings.

How can I verify the bearing is running correctly after installation?

Listen for smooth, quiet rotation at up to 19 000 RPM and confirm operating temperature stays between -40 °C and 175 °C; the SRI 2 / Polyrex EM grease fill is sealed by the double shields.

Does the box include any mounting hardware or just the single bearing?

Only the single 5200 angular contact ball bearing is supplied — no spacer, locknut, circlip or additional lubricant is included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.