We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black oxide steel sprocket with 15 teeth and 3/4 inch bore

Tritan

Tritan 50BS15H 15-Tooth Sprocket 3/4in Bore 50 Chain Size

SKU CH-WD38-JA9BK

A 15-tooth steel sprocket with a 3/4-inch bore, keyway and set screws for 50 chain size

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorTransparent
  • 15-tooth design drives 50 chain efficiently
  • 3/4 inch bore with keyway fits shafts securely
  • Black oxide finish resists corrosion in tough environments
  • Two set screws lock sprocket firmly in place
  • 32 inch outside diameter matches standard 50 chain pitch

Tritan 15-Tooth Sprocket for 50 Chain

This Tritan sprocket features 15 teeth and a fixed 3/4-inch bore with keyway and set screws. It is designed for single-strand 50 chain with a 5/8-inch pitch. The steel construction includes a black oxide finish for durability. It suits power transmission builds needing this exact chain size.

Capacity and Headroom

The pitch diameter measures 3.006 inches and the outside diameter is 3.32 inches. Hub diameter reaches 2 3/8 inches with a projection of .657 inches. Length through bore is 1 inch. These dimensions define the space it occupies and the load it can transmit. Larger ratios or higher speeds would require a different sprocket.

50 Chain Interface Limits

This sprocket only fits 50 chain size with a 5/8-inch pitch. The bore is fixed at 3/4 inch with a 3/16-inch keyway width and 3/32-inch depth. Two set screws secure the shaft. It cannot adapt to other chain pitches, bore sizes, or multi-strand configurations.

Highlights

  • 15-tooth design drives 50 chain efficiently
  • 3/4 inch bore with keyway fits shafts securely
  • Black oxide finish resists corrosion in tough environments
  • Two set screws lock sprocket firmly in place
  • 32 inch outside diameter matches standard 50 chain pitch

Specifications

BrandTRITAN
TypeBearings, V-belts & Power Transmission Equipment
ColorTransparent

Questions about this item

Will the 15-tooth 50 chain sprocket with a 3/4 in bore and 3/16 in keyway fit the shaft on my existing gearbox?

The fixed bore is exactly 3/4 in with a 3/16 in wide by 3/32 in deep keyway and two set screws; match those dimensions to your shaft and key.

How do I verify the 50BS15H sprocket runs true after mounting it on the 3/4 in shaft?

Tighten both set screws on the key, rotate by hand and check for wobble at the 3.32 in outside diameter; chain should engage all 15 teeth without jumping.

Does the black-oxide finished sprocket come with the two set screws, or must I source them separately?

The box includes the sprocket with 1 in length through bore, 2 3/8 in hub diameter and both set screws already supplied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.