We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
10 ft nickel plated steel roller chain, single strand, riveted pins

Tritan

Tritan 40-1NP 10 ft Nickel Plated Chain

SKU CH-7YSP-FT9PB

A 10 ft nickel-plated roller chain with 1/2 in pitch and 3,900 lbf tensile strength for mildly corrosive environments

  • ColorTransparent
  • Nickel-plated steel resists mild corrosion for longer service life
  • 3,900 lbf tensile strength handles heavy-duty power transmission
  • 10 ft roller chain length suits extended drive installations
  • Riveted pin construction maintains reliable link integrity under load
  • Single-strand 1/2 in pitch fits standard #40 sprockets

Purpose & Fit

This 10 ft nickel plated roller chain is built for drives on business machines, food processing equipment, printing machines and textile machines. The single strand Series 40 construction uses riveted pins and a 1/2 in pitch for standard power transmission. Buyers who need a different pitch or multi strand chain should look elsewhere.

Durability & Environment

The steel chain delivers a tensile strength of 3,900 lbf and an overall width of 0.654 in with 5/16 in rollers. Nickel plating provides an economic, high strength solution in mildly corrosive environments and helps improve overall life. No lubrication schedule or noise rating is supplied.

Deciding Spec

Chain number 40 with a 1/2 in pitch and 0.309 in inside width determines whether this part matches your sprockets and drive design. Verify those dimensions against your equipment before ordering.

Highlights

  • Nickel-plated steel resists mild corrosion for longer service life
  • 3,900 lbf tensile strength handles heavy-duty power transmission
  • 10 ft roller chain length suits extended drive installations
  • Riveted pin construction maintains reliable link integrity under load
  • Single-strand 1/2 in pitch fits standard #40 sprockets

Specifications

ColorTransparent
BrandTRITAN

Questions about this item

How is the 10 ft nickel-plated roller chain installed, and what step is often missed?

Measure the 10 ft length, wrap it around the sprockets with the 1/2 in pitch aligned, then connect the ends using a master link or by riveting the 0.309 in inside-width pins; the step often missed is fully seating the riveted pins so the 0.654 in overall width stays uniform.

What maintenance or replacement will the Series NP chain need later?

Lubricate the 5/16 in rollers regularly and inspect the 3,900 lbf tensile-strength steel for elongation; replace the chain once wear stretches the 1/2 in pitch beyond the sprocket tolerance.

What limit appears first on the 40-1NP chain under sustained use?

The 3,900 lbf tensile strength of the riveted-pin steel is the first limit reached under continuous load in mildly corrosive environments.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.