We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black oxide steel sprocket, 24 teeth, 5/8 inch bore with keyway and set screws

Tritan

Tritan 35BS24H 5/8 Sprocket Collectible

SKU CH-XJKK-XFP8G

A steel sprocket with a 5/8 in bore, 24 teeth and 3.07 in outside diameter for 35 chain

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorTransparent
  • 24-tooth design ensures smooth 35-chain engagement
  • 5/8-inch finished bore with keyway simplifies installation
  • Black oxide finish protects steel from corrosion
  • Two set screws lock sprocket securely in place
  • 07-inch outside diameter fits standard drive layouts

Precision Steel Sprocket for 35 Chain

The Tritan 35BS24H is a finished-bore steel sprocket built for 35 chain size with 24 teeth. It suits maintenance engineers and hobbyists who need a direct replacement on existing 3/8 in pitch drives. The 5/8 in bore includes a 3/16 in wide by 3/32 in deep keyway plus two set screws for a positive lock.

Black-Oxide Finish Handles Continuous Duty

Black-oxide coating resists corrosion during extended operation in moist or outdoor environments. The 2.873 in pitch diameter and 3.07 in outside diameter maintain consistent engagement with 35 chain over long runs. Steel construction and a 2 in hub diameter distribute load evenly across the 7/8 in length through bore without deformation.

Verify Bore, Keyway and Chain Match Before Ordering

Confirm your shaft measures exactly 5/8 in and that the keyway dimensions match 3/16 in width by 3/32 in depth. Ensure the drive uses single-strand 35 chain with 3/8 in pitch. This sprocket fits only fixed-bore, one-side hub configurations; it will not suit tapered bushings or through-hub designs.

Highlights

  • 24-tooth design ensures smooth 35-chain engagement
  • 5/8-inch finished bore with keyway simplifies installation
  • Black oxide finish protects steel from corrosion
  • Two set screws lock sprocket securely in place
  • 07-inch outside diameter fits standard drive layouts

Specifications

BrandTRITAN
TypeBearings, V-belts & Power Transmission Equipment
ColorTransparent

Questions about this item

Does the 24-tooth steel sprocket generate noticeable noise or heat when run continuously?

The black-oxide finished steel sprocket with 24 teeth has no moving parts of its own; any noise or heat comes from the chain and bearings it drives, not from the sprocket itself.

What shaft size and keyway dimensions must already be on the machine for this 5/8-inch bore sprocket to fit?

The sprocket requires a 5/8-inch diameter shaft with a 3/16-inch wide by 3/32-inch deep keyway to match the included keyway and two set screws.

Will this 35-chain-size sprocket with a 2.873-inch pitch diameter mesh correctly with the older 35 roller chain I already have?

Yes, the 24-tooth sprocket is cut for standard 35 chain pitch (3/8 inch) and a 2.873-inch pitch diameter, so it will engage existing 35 chain without modification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.