We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel sprocket with black oxide finish, 22 teeth, 3/4 inch bore, keyway and set screws

Tritan

Tritan 35BS22H 3/4" Bore Sprocket 35 Chain 22T

SKU CH-YDV4-RPKH9

A 22-tooth steel sprocket with a 3/4-inch bore, keyway, and set screws for 35 chain

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorTransparent
  • Fits 3/8 in pitch chain with 22 teeth
  • 3/4 in bore includes keyway and two set screws
  • Black oxide steel finish resists corrosion
  • 83 in outside diameter matches 35 chain spec
  • 707 in hub projection keeps assembly compact

Finished-bore sprocket for #35 chain

The Tritan 35BS22H is a steel sprocket with a 3/4 in finished bore, keyway and two set screws for #35 roller chain. It has 22 teeth, a 2.83 in outside diameter and a 2.635 in pitch diameter. The black-oxide finish resists corrosion in power-transmission drives.

Replaces worn #35 sprockets with a 3/4 in bore

This sprocket directly replaces an existing #35 chain sprocket that uses a 3/4 in fixed bore, 2 in hub diameter and 7/8 in length through bore. The jump is worth it when the current sprocket shows tooth wear, keyway damage or excessive run-out that affects chain engagement.

Suits maintenance on conveyors.

It fits shafts that accept a 3/4 in bore with a 3/16 in wide by 3/32 in deep keyway and two set-screw positions. Builders needing a different bore size, tooth count, hub style or multi-strand chain should look at other sprockets.

Highlights

  • Fits 3/8 in pitch chain with 22 teeth
  • 3/4 in bore includes keyway and two set screws
  • Black oxide steel finish resists corrosion
  • 83 in outside diameter matches 35 chain spec
  • 707 in hub projection keeps assembly compact

Specifications

BrandTRITAN
TypeBearings, V-belts & Power Transmission Equipment
ColorTransparent

Questions about this item

What shaft diameter does the 3/4 in bore of this 35BS22H sprocket fit?

The fixed bore is 3/4 in with a 3/16 in wide by 3/32 in deep keyway and two set screws for positive drive.

How do I install the sprocket so the key does not work loose?

Slide the sprocket onto the shaft, align the key in the 3/16 in keyway, then tighten both set screws against the key and shaft flat.

When should I replace the sprocket or its set screws?

Replace the sprocket when the 22 teeth show hooking or the 2.83 in outside diameter wears unevenly; replace set screws if threads strip.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.