Tritan
Tritan 25-2R CL roller attachment link, 9/16 in, steel
Steel roller attachment link for 25-series power-transmission chains with 9/16 in overall width and riveted-pin construction
- Connects two strands for power transmission using a riveted pin
- Steel construction handles up to 350 degrees Fahrenheit operating temperature
- Plain finish resists corrosion with light oil preservative lubrication
- 9/16 inch overall width fits standard 25 chain pitch applications
- 1/8 inch roller diameter and inside width ensure smooth engagement
Tritan 25-2R CL Roller Link
This double-strand roller attachment link connects #25 chain in power transmission systems. The plain steel construction suits general industrial use where light oil preservative is acceptable. It replaces a worn connecting link without changing the chain assembly.
Riveted Pin Construction
The riveted pin design provides a permanent joint that resists loosening under vibration. With a 1/4 in pitch and 1/8 in roller diameter, it matches standard #25 chain dimensions for smooth sprocket engagement. The 15/64 in plate height and 3/32 in pin diameter maintain proper chain alignment.
Temperature Range Limits
Operating range spans 0 to 350 degrees F, so it is not suited for extreme cold or high-heat environments. Buyers needing stainless steel, corrosion-resistant finishes, or heavy-series chain ratings should select a different link type.
Highlights
- Connects two strands for power transmission using a riveted pin
- Steel construction handles up to 350 degrees Fahrenheit operating temperature
- Plain finish resists corrosion with light oil preservative lubrication
- 9/16 inch overall width fits standard 25 chain pitch applications
- 1/8 inch roller diameter and inside width ensure smooth engagement
Specifications
| Brand | TRITAN |
|---|
Questions about this item
What chain pitch does the 25-2R CL link use, and what size chain does that limit it to?
The link uses a 1/4 in pitch, so it only fits ANSI 25 roller chain.
What are the pin diameter and plate height that determine whether this link clears the sprockets and side plates?
Pin outside diameter is 3/32 in and plate height is 15/64 in.
How is the riveted-pin connecting link installed, and which step is most often done incorrectly?
Press the link plates onto the pins, then peen both pin ends evenly; the step most often done incorrectly is uneven peening that binds the rollers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
