We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 6ft USB-A to USB-B antibacterial cable with moulded connectors

Tripp Lite

Tripp Lite U022AB006WH 6ft USB-A to USB-B antibacterial cable USB 2.0 white

SKU CH-3RH8-JQHNY MPN U022AB006WH

A 6 ft USB 2.0 cable with antibacterial coating connects USB-A hosts to USB-B peripherals

  • TypeUSB A to USB B
  • Antibacterial coating reduces surface microbes
  • 6 ft length suits desktop setups
  • USB-A to USB-B connects peripherals
  • USB 2.0 supports standard data rates
  • White finish matches light-coloured equipment

Antibacterial USB cable for printers and peripherals

This six-foot cable connects a USB-A host to a USB-B device such as a printer, scanner or external drive enclosure. The jacket incorporates an antibacterial treatment that inhibits microbial growth on the surface. It is suited to offices, schools or healthcare environments where shared equipment is common. The white finish helps the cable remain visible in cable trays.

Low-draw USB 2.0 operation with minimal heat

As a passive USB 2.0 assembly the cable draws only the bus power required by the attached device. No active electronics are present so the cable itself generates negligible heat and adds no audible noise to the setup. The moulded strain reliefs protect the solder joints during routine plugging and unplugging.

Consistent signal integrity over the full length

The 22 AWG power conductors and twisted data pair maintain USB 2.0 High Speed signalling across the entire six-foot run. Under sustained bulk transfers the link remains stable without the signal degradation that can appear on longer or thinner cables. The connectors are rated for the standard insertion cycles specified by the USB 2.0 specification.

Highlights

  • Antibacterial coating reduces surface microbes
  • 6 ft length suits desktop setups
  • USB-A to USB-B connects peripherals
  • USB 2.0 supports standard data rates
  • White finish matches light-coloured equipment

Specifications

BrandTripp Lite
TypeUSB A to USB B
Shipping weight0.45 kg
Package size230 × 170 × 10 mm

Questions about this item

How do I connect the USB-A to USB-B cable and which end goes to the printer?

Plug the USB-A connector into the host computer and the USB-B connector into the peripheral; both ends are keyed so they only insert one way.

Will the antibacterial coating on the jacket wear off and need reapplication?

The antimicrobial agent is embedded in the cable jacket material and does not require reapplication or special maintenance.

What limits data throughput on this 6 ft USB 2.0 link during long transfers?

The USB 2.0 interface governs the maximum signalling rate, so sustained throughput cannot exceed that specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.