We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1 ft power extension cord with C14 to C13 connectors

Tripp Lite

Tripp Lite Standard Power Extension Cord 1-ft 18AWG 10A C14-C13

SKU CH-EG38-ZBR7H

A one-foot extension cord with C14 to C13 connectors rated for 10A using 18AWG wire

  • Extends reach by 1 ft with IEC-320-C14 to IEC-320-C13 connectors
  • Handles 10 A loads using 18 AWG copper conductors
  • Fits standard C13 equipment and C14 inlets on PDUs or UPS units
  • Compact 1 ft length reduces cable clutter in tight racks
  • New condition ensures reliable power delivery from day one

One-Foot IEC Extension

This one-foot Tripp Lite power extension cord carries a C14 plug on one end and a C13 socket on the other. It is rated for 10 A at 18 AWG and follows the IEC-320-320 connector standard. The short length keeps cable clutter low inside a rack or enclosure. Condition is new.

Suits Tight Server Racks

The cord fits administrators who need a short jumper between a PDU C13 outlet and a device C14 inlet. It is not for installers who need a longer reach, a heavier gauge for higher current, or a different IEC connector pairing. The fixed one-foot length limits placement flexibility in larger cabinets.

10 A 18 AWG Rating

The 10-ampere, 18-AWG rating is the single figure that decides compatibility. Equipment drawing more than 10 A requires a heavier cable. Devices with non-IEC inlets need an adapter or a different cord. Match the amperage and connector type before purchase.

Highlights

  • Extends reach by 1 ft with IEC-320-C14 to IEC-320-C13 connectors
  • Handles 10 A loads using 18 AWG copper conductors
  • Fits standard C13 equipment and C14 inlets on PDUs or UPS units
  • Compact 1 ft length reduces cable clutter in tight racks
  • New condition ensures reliable power delivery from day one

Specifications

No published specifications for this item yet.

Questions about this item

What connectors does the 1-ft 18AWG cord use?

It has an IEC-320-C14 plug on one end and an IEC-320-C13 socket on the other.

How do I install the C14-C13 extension cord?

Insert the C14 plug into a C13 inlet on your power source, then connect your device's C14 plug into the cord's C13 socket.

When should I replace this 10A 18AWG power cord?

Replace it if the jacket shows cuts, the pins are bent, or the connectors feel loose when mated.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Power Extension Cords

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.