Tripp Lite
Tripp Lite SM2200RMXL2UTAA 2200 VA 1920 W 2U UPS
2U rack/tower UPS delivers 2200 VA and 1920 W, corrects 83 V to 145 V brownouts and overvoltages, and provides eight NEMA outlets plus USB, serial and SNMP management
- Input Voltage Range120V AC
- VA Rating2200 VA
- Watts1920 Watts
- Output Voltage120V
- Output Frequency60 Hz
- Outlets8
- 2200 VA capacity supports critical rack equipment
- Automatic voltage regulation corrects 83V to 145V without battery drain
- Four 5-15R and four 5-15/20R outlets connect diverse loads
- USB, serial, EPO and SNMP slot enable remote management
- TAA compliant and tested to UL1778 for government procurement
2U Rack/Tower UPS for 120V Networks
The Tripp Lite SmartPro SM2200RMXL2UTAA is a line-interactive uninterruptible power supply rated at 2200 VA and 1920 W. It fits a 2U rack space or stands as a tower and corrects brownouts and overvoltages between 83V and 145V without using battery power. Eight NEMA outlets (four 5-15R and four 5-15/20R) connect protected equipment. The unit ships with USB, serial and EPO cables plus PowerAlert management software.
Suited for 120V Servers and Network Gear
This UPS suits administrators who need 120V input and output with 2200 VA capacity in a 2U form factor. It is not for buyers who need input voltages outside 120V AC, longer runtime at full load than 4.5 minutes, or more than eight outlets. It is also not for sites that cannot accommodate a 64 lb unit or require a different outlet mix.
2200 VA / 1920 W Capacity Decides Fit
The 2200 VA / 1920 W rating is the single figure that determines whether this UPS can support the connected load. At full load the battery provides 4.5 minutes of runtime; at half load it provides 12 minutes. Recharge from 10% to 90% takes less than 4.5 hours. The replaceable battery cartridge is RBC94-2U.
Highlights
- 2200 VA capacity supports critical rack equipment
- Automatic voltage regulation corrects 83V to 145V without battery drain
- Four 5-15R and four 5-15/20R outlets connect diverse loads
- USB, serial, EPO and SNMP slot enable remote management
- TAA compliant and tested to UL1778 for government procurement
Specifications
| Brand | TRIPP LITE |
|---|---|
| Series | SmartPro |
| Model | SM2200RMXL2UTAA |
| Input Voltage Range | 120V AC |
| VA Rating | 2200 VA |
| Watts | 1920 Watts |
| Output Voltage | 120V |
| Output Frequency | 60 Hz |
| Outlets | 8 |
| Outlet Type | 4 x 5-15R outlet(s) 4 x 5-15/20R outlet(s) |
| Battery Type | Valve Regulated Lead Acid (VRLA) |
| Battery Run Time | Full Load Runtime: 4.5 min. (1920w) Half Load Runtime: 12 min. (960w) |
| Battery Recharge Time | Less than 4.5 hours from 10% to 90% |
| Battery Replaceable | RBC94-2U |
| Alarms | Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions |
| Interface Port | USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface |
| Management Software | PowerAlert |
| Approvals | Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI); ROHS (Restriction of Hazardous Substances); TAA Compliant |
| Rackmountable | 2U |
| Surge Energy Rating | 570 joules |
| Features | Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases 2.2kVA / 2200VA / 1920W line interactive 2U rack/tower UPS, Sine Wave 120V output, Corrects brownouts and overvoltages from 83V to 145V 0.9 Power Factor, Interactive LCD interface Extended runtime options up to 1600W 4 post compatible mounting accessories 96% line-mode efficiency, 2 switched load banks USB, RS232, EPO and slot for SNMPWEBCARD option 120V NEMA 5-20P input, 4 NEMA 5-15R & 4 NEMA 5-15/20R outlets |
| Dimensions | 3.46" x 17.32" x 19.29" ( H x W x D) |
| Weight | 57.60 lbs. |
| Package Contents | SM2200RMXL2UTAA TAA Compliant UPS system PowerAlert software with USB, Serial & EPO cabling 4 post installation kit Owner's manual |
| Shipping weight | 33.57 kg |
| Package size | 703 × 652 × 254 mm |
Questions about this item
What input plug does the SM2200RMXL2UTAA need to connect to my building power?
The UPS uses a NEMA 5-20P plug that requires a matching 20 A branch circuit.
Will the UPS keep running if I only have a standard 15 A wall outlet available?
A 5-20P plug will not fit a 5-15R receptacle; you must provide a 20 A outlet or have an electrician install one.
How can I verify the unit is conditioning power correctly after installation?
The LCD shows real-time input voltage; it should stay between 83 V and 145 V while the UPS corrects brownouts and overvoltages.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115078BTC
In stock
