Tripp Lite
Tripp Lite RS1215-RA 1U Rackmount Power Strip 12 Outlets 15A 15ft Cord 5-15P Black
A 1U rackmount power strip with 12 right-angle outlets, a 15A circuit breaker and a 15ft cord for 19-inch racks
- 12 wide-spaced right-angle outlets fit bulky transformers
- 1U 19-inch rackmount design saves vertical space
- 15 A circuit breaker protects connected equipment
- 15 ft cord with 5-15P plug reaches distant power sources
- 120 V 15 A rating supports standard rack loads
1U 12-outlet rackmount PDU
This 1U rackmount power strip provides twelve right-angle outlets spaced to accept bulky transformers without blocking adjacent sockets. Six outlets sit on the front face and six on the rear for flexible cable routing. It mounts in standard 19-inch racks and carries a 15 A circuit breaker for overload protection.
Thermals noise and power draw
The unit operates passively with no fan, so it adds no audible noise to the rack environment. Power draw is limited to the connected load up to the 15 A rating at 120 V. The 15-foot cord with a 5-15P plug delivers power from a standard branch circuit without requiring additional wiring.
Replaces basic strips and tight-spaced PDUs
It upgrades from consumer power strips that lack rack ears, right-angle outlets or a built-in breaker. The jump is worth it when transformer-heavy gear such as wall-wart power supplies must sit side by side in a 1U space. It does not suit installations that need metered monitoring, switched outlets or input voltages other than 120 V.
Highlights
- 12 wide-spaced right-angle outlets fit bulky transformers
- 1U 19-inch rackmount design saves vertical space
- 15 A circuit breaker protects connected equipment
- 15 ft cord with 5-15P plug reaches distant power sources
- 120 V 15 A rating supports standard rack loads
Specifications
No published specifications for this item yet.
Questions about this item
How do I mount the 1U rackmount power strip in a standard 19 inch rack and what is the common mistake?
Use the integrated mounting brackets to secure the 1.75 inch high unit into a 1U space; the common mistake is not tightening both front and rear bracket screws, which lets the 4.6 pound strip sag under cable weight.
What maintenance or replacement will the 15A circuit breaker need over time?
The built-in 15A circuit breaker is resettable — if it trips from an overload, press the reset button to restore power; no user-replaceable parts or scheduled maintenance are required for the breaker itself.
What is the first limit reached under sustained 120 volt load across all 12 outlets?
The 15A circuit breaker will trip first if the combined draw exceeds 15 amps, protecting the 15 foot cord and 5-15P plug from overheating during continuous high-current use.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



