Tripp Lite
Tripp Lite PS712B Surge Protector 7 Outlet 12 ft Cord 120V 1.80 kW Black
A 7-outlet surge protector with a 12 ft cord rated for 120 V and 1.80 kW, wall-mountable for tidy power distribution
- 7 outlets power multiple devices from one wall socket
- 12 ft cord reaches distant outlets without extension leads
- 80 kW rating supports appliances and power tools
- Keyhole slots allow secure wall mounting to reduce clutter
- One transformer-spaced outlet fits bulky plugs without blocking neighbours
Power distribution for multiple devices
Tripp Lite's PS712B power strip provides seven NEMA 5-15R outlets from a single wall socket. The 12 ft cord allows flexible placement for appliances, power tools or lighting. A designated transformer plug outlet keeps bulky adapters from blocking neighbouring sockets. Keyhole mounting slots enable secure wall installation to reduce cable clutter.
Passive operation with high power capacity
The unit draws 120 V AC and supports loads up to 1.80 kW without active cooling. No fans or moving parts mean completely silent operation in any environment. The black housing stays cool during normal use because power passes through directly. Thermal management relies on the robust internal bus bars rather than airflow.
Durable housing with practical mounting
The attractive black enclosure resists impacts and daily wear in workshops or offices. Keyhole slots accept standard screws for flush wall mounting at the installer's chosen height. The 12 ft cord terminates in a NEMA 5-15P plug compatible with standard receptacles. Seven outlets accommodate multiple devices while the transformer slot handles oversized power bricks.
Highlights
- 7 outlets power multiple devices from one wall socket
- 12 ft cord reaches distant outlets without extension leads
- 80 kW rating supports appliances and power tools
- Keyhole slots allow secure wall mounting to reduce clutter
- One transformer-spaced outlet fits bulky plugs without blocking neighbours
Specifications
No published specifications for this item yet.
Questions about this item
How do I mount the PS712B to the wall using the keyhole slots?
Align the keyhole mounting slots on the back of the black housing with pre-installed screws on the wall, then slide the unit down to secure it in place.
When should I replace the PS712B surge protector?
Replace the unit after a major surge event or if the protection indicator shows the MOVs are no longer absorbing excess voltage.
What is the maximum load the PS712B can handle continuously?
The strip supports up to 1.80 kW at 120 V AC across all seven NEMA 5-15R outlets before the circuit breaker trips.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115078BTC
In stock
