We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tripp Lite 2U rackmount PDU with digital meter and dual power cords

Tripp Lite

Tripp Lite PDUMH30AT PDU 2.9 kW 120V 30A 24x5-15/20R 1xL5-30R 2xL5-30P 10ft 2U

SKU CH-AKTH-G96KN MPN PDUMH30AT

A metered 2U rackmount PDU with automatic transfer switching, dual 10 ft L5-30P inputs, 24 NEMA 5-15/20R outlets, one L5-30R outlet and a digital load display

  • TypeSwitched, Metered
  • Rack Size2U
  • StyleRackmount
  • Front Panel LEDsPrimary and Secondary input connection. Digital current mete
  • CertificationsTested to UL 60950 (USA, Canada), Class A (Emissions), NOM (
  • ROHSYes
  • Automatic transfer switching keeps equipment running when one power source fails
  • Digital meter displays real-time voltage, kilowatt load and output amperage across four load segments
  • Twenty-four 5-15/20R outlets plus one L5-30R outlet support dense rack deployments
  • Dual NEMA L5-30P inputs on ten-foot cords connect to separate UPS or utility feeds
  • Two-pole 20 A breakers protect each bank of twelve outlets against overloads

Metered ATS PDU for 120V racks

This 2U rack-mount power distribution unit combines an automatic transfer switch with metered monitoring. Dual NEMA L5-30P inputs accept separate primary and secondary sources up to 30 A each. The unit delivers 2.9 kW through 24 NEMA 5-15/20R outlets and one L5-30R outlet. A digital meter reports voltage, kilowatt load and output amperage across four load segments.

Verify rack space and input circuits before ordering

The PDU occupies 2U of horizontal rack space and ships with mounting brackets, plug-retention shelves and cable ties. Each 10-foot input cord ends in an L5-30P plug, so two compatible 30 A circuits must be available. Output protection uses two 20 A breakers, each covering twelve 5-15/20R outlets. Operating elevation is rated to 10,000 feet and storage temperature spans -15 to 50 °C.

Replaces basic PDUs without transfer switching

Facilities running single-cord PDUs gain automatic failover between two independent feeds without rewiring outlets. The solid-state transfer switch moves load instantly when the primary source deviates. TAA compliance suits federal procurement. Buyers who need switched outlet control or remote reboot per port should note this model provides metering and ATS only.

Highlights

  • Automatic transfer switching keeps equipment running when one power source fails
  • Digital meter displays real-time voltage, kilowatt load and output amperage across four load segments
  • Twenty-four 5-15/20R outlets plus one L5-30R outlet support dense rack deployments
  • Dual NEMA L5-30P inputs on ten-foot cords connect to separate UPS or utility feeds
  • Two-pole 20 A breakers protect each bank of twelve outlets against overloads

Specifications

BrandTripp Lite
ModelPDUMH30AT
TypeSwitched, Metered
Rack Size2U
StyleRackmount
Front Panel LEDsPrimary and Secondary input connection. Digital current meter display shows the amount of power consumption in amps for entire PDU output.
CertificationsTested to UL 60950 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS Complaint
ROHSYes
Package IncludesATS / Metered PDU
Rackmount installation brackets
Installable plug-retention shelves & cable ties
Input Voltage100V, 120V, 127V
Maximum Input Current30A
Input Connector(s)NEMA L5-30P
Cord Length10 ft.
Output Voltage100V, 120V, 127V
Output Frequency60Hz
Output Connector(s)24 x 5-15/20R & 1 x L5-30R outlets
Overload Protection2 x 20A output breakers protect 12 x 5-15/20R outlets each
Operating Elevation0 - 10,000 Feet (0 - 3000 m)
Storage Temperature-15 to 50 degrees Celsius
Storage Relative Humidity5-95% non-condensing
Features120V 30A Automatic Transfer Switch (ATS) / Metered PDU (Power Distribution Unit), Agency de-rated to 24A continuous
Provides a redundant power option for critical networking equipment with a single input power cord
2 digit display with segment selection button reports output power consumption in amps for four output segments (Segment 1: 12 x 5-15/20R outlets / Segment 2: 12 x 5-15/20R outlets / Segment 3: L5-30R outlet / Segment 4: total output of all outlets combined)
2U horizontal rackmount form factor; 12.50" depth
25 outlets (24 x 5-15/20R, 1 x L5-30R)
Set of two 10 Feet NEMA L5-
Dimensions3.41" x 17.32" x 11.89"
Weight13.71 lbs.
Shipping weight8.17 kg
Package size610 × 508 × 457 mm

Questions about this item

What comes in the box and do I need to buy any extra mounting hardware or cords?

The package includes the ATS metered PDU, rackmount installation brackets, plug-retention shelves and cable ties. Two 10 ft input cords with NEMA L5-30P plugs are attached, so no separate cords are required for the primary and secondary inputs.

How do I decide between the 5-15/20R outlets and the single L5-30R outlet for my equipment?

Use the 24 x 5-15/20R outlets for standard 120 V devices with NEMA 5-15 or 5-20 plugs; the single L5-30R outlet accepts a locking 30 A plug for higher-draw equipment that needs a secure connection.

What does the 2.9 kW rating mean for the actual load I can run on this PDU?

At 120 V the 2.9 kW rating equals the 30 A input limit; the two 20 A output breakers each protect 12 of the 5-15/20R outlets, so total continuous draw must stay within 30 A across all outlets combined.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.