Tripp Lite
Tripp Lite PDUMH20HVATNET Switched PDU 1U 20A 200-240V 10 Outlets 12ft Cord
A switched 1U PDU with automatic transfer switching, eight individually controlled C13 outlets, two unswitched C19 outlets, and a 12 ft C20 input cord for 200-240V 20A rack power
- TypeSwitched
- Rack Size1U
- StyleHorizontal
- Front Panel LEDs8 LEDs display power on-off status for each C13 output recep
- CertificationsTested to UL 60950 (USA, Canada), CE (Europe), Class A (Emis
- ROHSYes
- Automatic transfer switch provides redundant power for single-cord devices
- 10 outlets (8 C13 switched, 2 C19 unswitched) fit dense rack deployments
- Built-in LX Platform network interface enables remote outlet control and monitoring
- 1U horizontal form factor saves rack space in 200-240V environments
- Tested to UL 60950, CE, Class A and NOM for global compliance
Switched PDU with ATS for single-cord equipment
The Tripp Lite PDUMH20HVATNET is a 1U horizontal rackmount power distribution unit that adds automatic transfer switching and per-outlet control to devices with only one power supply. It accepts dual 200 to 240V feeds at up to 20A and distributes power across ten IEC outlets for network, server and telecom gear.
Ten IEC outlets with individual switching and dual
Eight C13 receptacles are independently switched and monitored by front-panel LEDs, while two C19 outlets remain always on for high-draw loads. Two IEC-320 C20 inlets connect to separate A and B sources through the included 12 ft cords, and the built-in LX Platform network interface enables remote outlet management and a two-digit current readout.
Verify rack space, input voltage
The unit occupies 1U of horizontal rack space and requires a 200 to 240V supply at 50 or 60Hz with C20 connectors on both feeds. Equipment must use C13 or C19 plugs; the two C19 outlets are not switched, so devices needing sequenced restarts should use the eight switched C13 ports.
Highlights
- Automatic transfer switch provides redundant power for single-cord devices
- 10 outlets (8 C13 switched, 2 C19 unswitched) fit dense rack deployments
- Built-in LX Platform network interface enables remote outlet control and monitoring
- 1U horizontal form factor saves rack space in 200-240V environments
- Tested to UL 60950, CE, Class A and NOM for global compliance
Specifications
| Brand | Tripp Lite |
|---|---|
| Model | PDUMH20HVATNET |
| Type | Switched |
| Rack Size | 1U |
| Style | Horizontal |
| Front Panel LEDs | 8 LEDs display power on-off status for each C13 output receptacle, plus 2 additional LEDs to indicate input power status for primary and secondary inputs |
| Certifications | Tested to UL 60950 (USA, Canada), CE (Europe), Class A (Emissions), NOM (Mexico) |
| ROHS | Yes |
| Package Includes | Switch, Metered PDU with ATS Support Set of 2 x C19 to C20 12 Feet power cables User manual with warranty information |
| Input Voltage | 200 / 208 / 230 / 240V |
| Maximum Input Current | 20A |
| Input Connector(s) | IEC-320 C20 |
| Cord Length | 12 ft |
| Output Voltage | 200V, 208V, 220V, 230V, 240V |
| Output Frequency | 50/60Hz |
| Output Connector(s) | 8 x C13; 2 x C19 |
| Overload Protection | 8 individually switched C13 output receptacles |
| Operating Relative Humidity | 5 - 95% |
| Operating Elevation | 0 - 10000 Feet |
| Storage Temperature | -15 to 50 Celcius degree |
| Features | 200 - 240V 16A Automatic Transfer Switch (ATS) / Switched PDU (Power Distribution Unit) Provides a redundant power option for critical networking equipment with a single input power cord 2 digit display reports power consumption in amps 1U horizontal rackmount form factor 10 outlets (8 x C13 switched / 2 x C19 unswitched) Two C20 inlets for separate Primary and Secondary inputs; two 12 Feet C20 input cables included ATS circuits normally maintain output sourced from the primary input cable; As primary input power fails, the ATS will switch to maintain output sourced from the secondar |
| Dimensions | 1.72" x 17.30" x 14.80" |
| Weight | 10.30 lbs. |
| Shipping weight | 9.53 kg |
| Package size | 598 × 533 × 135 mm |
Questions about this item
What input connector does the 20A 200-240V supply use?
The PDU draws power through an IEC-320 C20 inlet on a 12 ft cord, rated for 20A maximum input current at 200, 208, 230 or 240V.
How much rack space and what mounting style does the 1U unit need?
It occupies 1U of horizontal rack space and mounts in a standard 19-inch rack; the chassis is 1U high and designed for horizontal installation.
How do you access the LX Platform network interface for the first time, and what step is often missed?
Connect the Ethernet port to your network, then browse to the IP address shown on the two-digit display; the step often missed is setting a static IP or DHCP reservation before configuring outlet switching and ATS thresholds.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115015BTC
In stock
