Tripp Lite
Tripp Lite PDUMH15NET2LX PDU 120V 1.4kW 15A 8×5-15R 5-15P
Distributes 120 V power to eight 5-15R outlets with a 15 A 5-15P input and 1.4 kW capacity
- 8 switched outlets enable remote power cycling per device
- 4 kW capacity supports dense 120 V rack loads
- 15 A NEMA 5-15P input fits standard facility circuits
- Network management allows outlet monitoring and control over IP
Network-switched 8-outlet PDU
This 120 V power distribution unit supplies 1.4 kW through eight 5-15R receptacles from a single 5-15P inlet. It is built for rack-mounted servers and network gear that need remote outlet control and monitoring. The switched design lets administrators cycle power to individual devices without visiting the rack.
15 A circuit limits total load
The 15 A rating caps combined draw at 1.4 kW, so equipment exceeding that threshold must use a higher-capacity unit. Only NEMA 5-15R outlets are provided, restricting use to devices with matching plugs. No other voltage or receptacle options are available on this model.
Highlights
- 8 switched outlets enable remote power cycling per device
- 4 kW capacity supports dense 120 V rack loads
- 15 A NEMA 5-15P input fits standard facility circuits
- Network management allows outlet monitoring and control over IP
Specifications
No published specifications for this item yet.
Questions about this item
Should I pick the 8-outlet 1.4 kW model or a different capacity?
This unit provides eight 5-15R outlets fed by a single 5-15P plug rated for 15 A at 120 V, so the 1.4 kW limit applies to the whole strip.
What does the 1.4 kW rating mean when I plug servers into it?
It is the maximum continuous load the 15 A input breaker will carry; the eight outlets share that 1.4 kW budget, so total connected equipment must stay below it.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



