We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tripp Lite PDU hot-swap manual bypass 1U rackmount 6 NEMA 5-20R outlets 2 NEMA 5-20P inputs

Tripp Lite

Tripp Lite PDUB201U PDU Hot Swap Manual Bypass 15A 6 5-20R 2 5-20P Inputs

SKU CH-PNE2-B9GRK MPN PDUB201U

Hot-swap PDU with manual bypass keeps six 5-20R outlets powered during UPS maintenance using dual 5-20P inputs at 120V 20A

  • TypeBasic
  • Hot-swap PDU keeps equipment running during UPS maintenance
  • Manual transfer switch selects UPS or utility power instantly
  • Dual NEMA 5-20P inputs provide redundant power paths
  • Six NEMA 5-20R outlets distribute 120V 20A power
  • ECO switching feature reduces energy consumption during operation

Hot-swap PDU for UPS maintenance

The Tripp Lite PDUB201U is a 120V 20A single-phase power distribution unit designed to keep mission-critical equipment running during UPS servicing. Its manual bypass switch transfers connected loads to utility power without interruption. Six NEMA 5-20R outlets support servers and network gear that require continuous uptime.

Dual-input installation with manual transfer

The unit ships with two NEMA 5-20P input cables for UPS and utility sources. Mount the PDU, connect both inputs and plug equipment into the six outlets. The front-panel switch selects Normal or Bypass mode. The only common issue is forgetting to verify both input phases match before switching, which can trip breakers.

Sustained operation under load

During extended bypass periods the PDU passes utility power directly to all six outlets without active conditioning. The 20A rating supports continuous draw up to the branch-circuit limit. No internal batteries or fans are present, so thermal behaviour depends entirely on the connected equipment and ambient airflow.

Highlights

  • Hot-swap PDU keeps equipment running during UPS maintenance
  • Manual transfer switch selects UPS or utility power instantly
  • Dual NEMA 5-20P inputs provide redundant power paths
  • Six NEMA 5-20R outlets distribute 120V 20A power
  • ECO switching feature reduces energy consumption during operation

Specifications

TypeBasic
Shipping weight3.63 kg
Package size540 × 210 × 135 mm

Questions about this item

How can I verify the PDUB201U is passing power correctly after installation?

With the manual transfer switch set to Normal, confirm the UPS input cable is live and the six NEMA 5-20R outlets deliver 120V power to connected equipment.

What cables and plugs are included with the PDUB201U and what must I supply?

The unit ships with two attached input cables ending in NEMA 5-20P plugs for UPS and utility feeds; you must provide NEMA 5-20P cords for each device plugged into the six 5-20R outlets.

Which version of the Tripp Lite hot-swap bypass PDU should I choose for a 15 A branch circuit?

The PDUB201U is rated for 15 A continuous load on a 20 A branch, making it the correct single-phase 120V model for that circuit size.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.