Tripp Lite
Tripp Lite PDU3EVSR1L1530 8.6kW 3-Phase Managed PDU 36 Outlets L15-30P
A managed three-phase PDU with 36 individually controllable outlets and remote monitoring via built-in network interface
- TypePower Distribution Units
- Managed per-outlet control reduces on-site visits
- 36 IEC outlets (30 C13, 6 C19) power dense racks
- IsoBreaker technology isolates faults to preserve uptime
- 6 kW three-phase capacity handles heavy loads
- 10 ft cord with L15-30P plug fits standard feeds
3-Phase Managed PDU for Data Centres
The Tripp Lite PDU3EVSR1L1530 is an 8.6 kW three-phase power distribution unit built for data centres, network service providers and large enterprises. It provides 36 individually switched outlets — 30 C13 and six C19 — across three load banks with a NEMA L15-30P input plug and a 10 ft (3 m) cord. A built-in Gigabit network interface enables remote monitoring and control of each outlet from anywhere on the network.
Thermal Management and Power Monitoring
The unit operates on 200-240 V three-phase supply and uses IsoBreaker technology to isolate overloads on individual load banks without tripping the entire PDU. Per-outlet LEDs show real-time power status while the integrated LCD reports aggregate voltage, current and power draw for each bank. Remote access lets administrators track consumption trends and rebalance loads before thermal issues arise.
Switched Outlets and Remote Management
Every outlet can be turned on, off, rebooted or locked out independently through the web interface, SNMP or command line, removing the need for physical site visits. The 0U vertical form factor fits 70 in (1.8 m) racks and the TAA-compliant design meets federal procurement requirements. Network-grade firmware supports scheduled power cycling, user-access policies and event logging for audit trails.
Highlights
- Managed per-outlet control reduces on-site visits
- 36 IEC outlets (30 C13, 6 C19) power dense racks
- IsoBreaker technology isolates faults to preserve uptime
- 6 kW three-phase capacity handles heavy loads
- 10 ft cord with L15-30P plug fits standard feeds
Specifications
| Type | Power Distribution Units |
|---|---|
| Shipping weight | 26.31 kg |
| Package size | 1918 × 234 × 165 mm |
Questions about this item
How do I mount the 70 in 0U PDU in a rack, and what step is often missed?
Mount the 1.8 m tall unit vertically using the 0U brackets; the step often missed is securing the 10 ft cord with the strain-relief clip so the L15-30P plug cannot pull loose.
Which replaceable parts will need attention over the life of the PDU3EVSR1L1530?
The IsoBreaker modules on each of the three load banks are the only field-replaceable components; swap a tripped module instead of replacing the whole PDU.
At what sustained load does the 8.6 kW rating hit its limit first?
Continuous draw above 8.6 kW across the 30 C13 and six C19 outlets trips the IsoBreaker protection on the affected 200-240 V bank.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114917BTC
In stock
