Tripp Lite
Tripp Lite P568-15M-FBR fibre optic cable 15 m 18 Gbps 4K 60Hz
Transmits 4K video at 60 Hz over 15 m using active fibre-optic HDMI 2.0 with EMI/RF protection and CEC support
- ColorBlack
- Length50 ft
- Connector DetailConnector on First End:HDMI Male Digital Audio/Video Connect
- FeaturesFeatures:Active Consumer Electronics Control (CEC) EMI/RF Pr
- Ultra HD 4K at 60 Hz with 18 Gbps bandwidth
- Fibre strands carry 4K signal over 15 m without loss
- Active design draws power from source for plug-and-play setup
- EMI and RF shielding keeps audio and video clean
- Supports 4:4:4 chroma and CEC for full HDR compatibility
Active fibre-optic HDMI link
The Tripp Lite P568-15M-FBR is a fifteen metre active fibre-optic cable with HDMI male connectors on both ends. It is built for installers and home-theatre owners who need to bridge long distances between a source and a display without signal loss. The cable draws operating power directly from the connected devices, so no external adapter is required. Its black jacket is rated flexible for routing through conduit or tight spaces.
18 Gbps bandwidth ceiling
The link supports 4K resolution at 60 Hz with 4:4:4 chroma subsampling, reaching the full 18 Gbps data rate of the HDMI 2.0 specification. Fibre strands carry the signal the full fifty feet without the attenuation that limits copper cables at this length. Bandwidth runs out above 4K 60 Hz, so 8K or high-refresh 4K sources will not pass their maximum throughput. HDR metadata and CEC commands travel normally within the supported envelope.
Plug-and-play system integration
Both ends present standard HDMI male plugs, so the cable fits any HDMI source and sink without converters or configuration. EMI and RF shielding prevents line noise from disrupting adjacent equipment or the A/V signal itself. EDID pass-through lets the source read the display capabilities automatically. The active design frees the installer from maximum-length limits imposed by passive copper, while the single-cable construction keeps the signal path simple.
Highlights
- Ultra HD 4K at 60 Hz with 18 Gbps bandwidth
- Fibre strands carry 4K signal over 15 m without loss
- Active design draws power from source for plug-and-play setup
- EMI and RF shielding keeps audio and video clean
- Supports 4:4:4 chroma and CEC for full HDR compatibility
Specifications
| Brand | Tripp Lite |
|---|---|
| Model | P568-15M-FBR |
| Color | Black |
| Length | 50 ft |
| Connector Detail | Connector on First End:HDMI Male Digital Audio/Video Connector on Second End:HDMI Male Digital Audio/Video |
| Features | Features:Active Consumer Electronics Control (CEC) EMI/RF Protection Extended Display Identification Data (EDID) Flexible |
| Shipping weight | 0.91 kg |
| Package size | 279 × 229 × 58 mm |
Questions about this item
Will the 15 m active fibre cable handshake with my 2019 AV receiver that only has HDMI 2.0 ports?
Yes, the cable is built to the HDMI 2.0 specification and carries CEC and EDID, so it will negotiate correctly with any HDMI 2.0 source or display.
How can I verify the link is running at 4K 60 Hz 4:4:4 after I connect it?
Check the display’s on-screen information menu or the source device’s video output settings; they should report 3840 x 2160 at 60 Hz with 4:4:4 colour sampling.
Does the box include the 15 m fibre cable with HDMI male ends on both sides, or do I need separate connectors?
The package contains the single 50 ft active fibre cable with HDMI male connectors on each end; no additional adapters are required.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115509BTC
In stock
