Tripp Lite
Tripp Lite P046-06N 6in L5-20P to 5-20R 20A 12AWG Computer Power Adapter Cord
Converts a locking NEMA L5-20P plug to a straight-blade NEMA 5-20R receptacle with 12 AWG cable rated for 20 A at 120 V
- TypeOthers
- ColorBlack
- Connector Number1
- Length0.5 ft.
- 6 in length connects L5-20P to 5-20R
- 12 AWG cable handles 20 A at 125 V
- UL Listed certification confirms safety compliance
- Locking input plug secures connection to PDU
- Heavy-duty construction suits server and data-centre use
Six-Inch Adapter for 20 A Locking Plugs
This six-inch cord converts a NEMA L5-20P locking plug into a standard NEMA 5-20R receptacle. It is built for 120 V 20 A circuits and uses 12 AWG conductors. The short length keeps cable clutter low in rack or bench environments.
UL-Listed Construction with Moulded Ends
The adapter arrives fully assembled with moulded connectors on both ends. No field wiring or tools are required — simply plug the locking side into the source and the equipment cord into the straight-blade outlet. The 12 AWG gauge matches the 20 A rating, so overheating is not a typical concern when used within spec.
Suits Rack Gear Needing a Straight-Blade Outlet
Technicians who need to power standard 5-20 equipment from an L5-20 PDU or generator outlet will find this a direct fit. Builders who require a longer reach, a different voltage, or a higher amperage rating should look at other adapter models.
Highlights
- 6 in length connects L5-20P to 5-20R
- 12 AWG cable handles 20 A at 125 V
- UL Listed certification confirms safety compliance
- Locking input plug secures connection to PDU
- Heavy-duty construction suits server and data-centre use
Specifications
| Brand | Tripp Lite |
|---|---|
| Model | 037332158321 |
| Type | Others |
| Color | Black |
| Connector Number | 1 |
| Length | 0.5 ft. |
Questions about this item
How do I confirm the adapter is passing power correctly after connecting the L5-20P plug to my PDU?
The green LED on the receptacle face lights up when the 120V 20A circuit is live and the locking plug is fully seated.
What comes in the box and do I need any extra hardware to use the 5-20R outlet?
Only the six-inch adapter cord is included; the 5-20R accepts a standard NEMA 5-20P equipment plug, so no extra parts are required.
Should I choose the six-inch version or a longer cable for my rack installation?
The six-inch length keeps cable clutter minimal in tight rack spaces; select a longer cord only if the equipment inlet sits farther from the PDU.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115026BTC
In stock
