We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 14 ft heavy-duty power extension cord with locking L6-30P to L6-30R connectors

Tripp Lite

Tripp Lite P041-014 14 ft 10 AWG 30A 250V L6-30P to L6-30R computer power extension cord

SKU CH-GR0M-A6WPY MPN P041-014

Extends a locking 30 A 250 V power connection by 14 ft with 10 AWG conductors and fully moulded NEMA L6‑30P to L6‑30R ends

  • TypeOthers
  • ColorBlack
  • Length0.5 ft.
  • Connector Number1
  • Connector DetailConnector on First End:NEMA L6-30P Connector on Second End:N
  • SpecificationsVoltage Rating:230 V AC
  • 14 ft reach lets you place PDU or UPS units farther from the wall outlet
  • 10 AWG conductors carry 30 A at 250 V for high-power equipment
  • NEMA L6-30P to L6-30R locking connectors prevent accidental disconnection
  • Tested to ANSI/UL 62, 817 and CAN/CSA C22.2 no. 21, 49 for safety compliance
  • Durable SJT jacket resists wear in demanding environments

14 ft 30 A L6-30 Extension Cord

This 14 ft heavy-duty cord extends a NEMA L6-30P plug to a NEMA L6-30R receptacle. It uses 10 AWG conductors rated for 30 A at 250 V. The fully moulded locking connectors and SJT jacket are tested to ANSI/UL 62, 817 and CAN/CSA C22.2 no. 21, 49. It is built for PDU and UPS power distribution in rack environments.

Suited for rack PDU and UPS links

Installers who need a locking 30 A 250 V extension between a PDU and a UPS or server will find the correct connectors and gauge here. Builders whose equipment uses lower-amperage inlets or non-locking plugs cannot use this cord. Buyers needing a different length or a different connector configuration should select another model.

10 AWG 30 A 250 V rating

The 10 AWG conductor size supports the full 30 A at 250 V rating required by L6-30 locking circuits. This gauge determines whether the cord can safely carry the load without voltage drop or overheating. Verify that the source and destination devices both specify NEMA L6-30P and L6-30R before ordering.

Highlights

  • 14 ft reach lets you place PDU or UPS units farther from the wall outlet
  • 10 AWG conductors carry 30 A at 250 V for high-power equipment
  • NEMA L6-30P to L6-30R locking connectors prevent accidental disconnection
  • Tested to ANSI/UL 62, 817 and CAN/CSA C22.2 no. 21, 49 for safety compliance
  • Durable SJT jacket resists wear in demanding environments

Specifications

BrandTripp Lite
ModelP041-014
TypeOthers
ColorBlack
Length0.5 ft.
Connector Number1
Connector DetailConnector on First End:NEMA L6-30P
Connector on Second End:NEMA L6-30R
SpecificationsVoltage Rating:230 V AC
FeaturesDevice Supported:PDU
UPS
Standard Warranty:Lifetime
Shipping weight1.78 kg
Package size316 × 274 × 81 mm

Questions about this item

What does the 30 A rating mean when I plug this cord into my PDU?

The cord is rated for continuous 30 A at 250 V, so it will carry the full load of a 30 A PDU outlet without overheating.

What does the NEMA L6-30 locking interface cap in practice?

The L6-30P plug and L6-30R receptacle lock together at 250 V single-phase, preventing accidental disconnection on PDUs and UPS units.

What clearance do the moulded L6-30 ends need to sit side-by-side in a rack?

Each end is a fully moulded NEMA L6-30 connector; allow roughly the depth of a standard locking body plus cable bend radius for adjacent mounting.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.