We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thick black 8ft power cord with locking L6-30 connectors at both ends

Tripp Lite

Tripp Lite P041-008 8ft 10AWG L6-30P to L6-30R computer power cord

SKU CH-0RWE-5WEXG

An 8 ft heavy-duty extension cord with 10 AWG copper conductors and L6-30P to L6-30R connectors rated for 30 A at 250 V

  • Heavy-duty 10AWG copper handles 30A loads
  • 8ft reach extends power to rack equipment
  • NEMA L6-30P to L6-30R fits high-voltage PDUs
  • 250V rating supports demanding server environments
  • UL and RoHS approved for safe deployment

8ft 10AWG L6-30 extension cord

This 8ft power extension cord connects a NEMA L6-30P plug to a NEMA L6-30R receptacle. It uses three 10AWG copper conductors inside an SJT jacket rated for 250V and 30A. The fully moulded ends provide strain relief and a secure fit in rack or floor-mounted power distribution units. It is built for indoor use with compatible server or networking equipment.

Suited for rack power distribution

The cord extends an existing L6-30 connection by 8ft, making it useful when a server, UPS or PDU sits just beyond the reach of the supplied lead. It supports the full 30A rating so attached devices draw their rated current without derating. Buyers who need a different connector style, a longer run or a lower gauge for higher amperage should look at other cable types.

30A 250V continuous capacity

The 10AWG conductors carry 30A continuously at 250V, matching the NEMA L6-30 specification. This headroom handles typical dual-supply servers, network switches or UPS units that use L6-30 inlets. The cord reaches its thermal limit at the rated 30A load; circuits requiring more current or a higher voltage rating need a different cable assembly.

Highlights

  • Heavy-duty 10AWG copper handles 30A loads
  • 8ft reach extends power to rack equipment
  • NEMA L6-30P to L6-30R fits high-voltage PDUs
  • 250V rating supports demanding server environments
  • UL and RoHS approved for safe deployment

Specifications

No published specifications for this item yet.

Questions about this item

Does this 8 ft 10AWG extension cord require a matching NEMA L6-30R outlet on my PDU or UPS to work?

Yes, the female end is a NEMA L6-30R, so the rack PDU or UPS you plug it into must provide that same locking 250 V 30 A receptacle.

Can I keep using my existing NEMA L6-30P equipment plug with this cord without an adapter?

Absolutely — the cord’s male NEMA L6-30P plugs directly into your facility receptacle, and the female NEMA L6-30R accepts your equipment’s original L6-30P plug unchanged.

How can I verify the cord is delivering 250 V at 30 A after installation?

With the cord seated and locked at both ends, measure 250 V across the hot conductors at the female receptacle and confirm your connected load draws up to 30 A without the connectors overheating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Computer Power Cords

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.